User Manual

• Press the 4-way joystick to the right to select the Settings menu, then select the Network
option.
• Scroll to Add network, then select an empty entry.
• Enter a name and the connection codes for the new network.
You will need to enter the Mobile Country Code (MCC) and Mobile Network Code (MNC)
for the network. This information will be provided by the network service provider.
o Call Settings
You can adjust several options that control additional options for calls.
− Forwarding Calls
You can forward calls received on your phone to another number. You can also specify when calls
should be forwarded and designate different destination numbers, depending on why the call was
forwarded.
To access the forwarding options:
• Press the 4-way joystick to the right to select the Settings menu, then select the Call settings
option. Then scroll to Call forwarding.
• Select the forwarding condition, and enter the destination number.
You can also check the status for each option and choose to activate or cancel that option.
You can select the following forwarding conditions.
Unconditional: Forward all incoming calls to the specified number.
All unanswered: Forward all calls that you do not answer.
No reply: Forward calls that are not replied.
Not reachable: Forward call when the phone is outside the service area.
Busy: Forward call when the phone is busy, such as during a call.
You can also view a summary of the forwarding options by selecting Status all, or cancel
all forwarding settings by selecting Cancel all.
− Call Waiting
Call waiting is a function that lets you know when another call is received while you are using the
phone for a different call.
If call waiting is active you will hear a faint ringing tone while you are in a call to notify you of the
new incoming call.
To answer the new call without disconnecting the current call:
• Press the Options soft key, then select Accept.
The phone places the existing call on hold, and connects you to the new caller.
You can use the following options to control the two calls.
Switch
Select this option to switch back to the first caller, or to switch between several calls.
Join calls
Select this option to connect all the calls together in a conference call. See “Multi-party
Call/Conference Call” on page X for details.
To activate call waiting or check the check the status of the function: