Applicant: Shintom Co., Ltd.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Important There are some basic rules that apply to most hardware installation procedures and need to be observed to prevent damage or injury. 1. Always make sure that any power is disconnected to the vehicle before handling any electrical components like wiring, fuseboxes, connectors, etc. 2. Never force any connection between components, electrical connectors or the like. 3. Always use the proper tools for the task at hand.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 2. Mount the Transceiver unit To install the cellular telephone with the transceiver unit located in the trunk-space of the automobile follow the steps outlined below. a. Place the mounting bracket so that the four bracket holes line up with the transceiver holes. b. Replace the four screws (supplied M4 × 6mm) in the screw kit so that the mounting bracket is secured to the transceiver unit. c.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 4. Mount the Cradle and Handset a. Using a pedestal mount. The cradle unit can be mounted as displayed. Be sure to use only supplied M4 × 10mm screws. Using improper screws will damage the cradle unit. b. Plug in the handset and Hands-Free Mic. Hands-Free Mic c. Check to make sure ALL signal and power leads are in place and properly connected.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 5. Antenna The following is the standard antenna installation for TR93. Antenna type : Glass mount type - Colinear Mount location : Rear window of a vehicle Antenna cable : RG-58/U 8 feet (2.44m) or longer Install the antenna on your vehicle as shown below.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 OPERATING INSTRUCTIONS 555 Wireless Blvd.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 TR93 MOBILE CELLULAR TELEPHONE Congratulations. By choosing the TR93, you have joined the millions of satisfied customers who are enjoying the benefits and quality performance that only an Audiovox Cellular Telephone can provide. Your Audiovox Mobile Cellular Telephone has been designed to the highest standards of quality and manufacturing excellence to fulfill both your personal and business requirements.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 TABLE OF CONTENTS INTRODUCTION .............................................. 3 Safety Information for Wireless Handheld Phones ................ 3 Features .................................................................................. 7 Key/Display Names and Functions ........................................ 8 INSTALLATION .............................................. 10 Cautions .................................................................
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Recalling Numbers from Memory ........................................ 24 Memory Dialing ............................................................... 24 Dialing after Telephone Number Search .......................... 25 Dialing after Name Search ................................................ 25 Speed Dialing ................................................................... 25 Link Dialing ......................................................
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 INTRODUCTION SAFETY INFORMATION FOR MOBILE PHONES IMPORTANT READ THIS INFORMATION BEFORE USING YOUR MOBILE CELLULAR TELEPHONE The cellular telephone is one of the most exciting and innovative electronic products ever developed. With it you can stay in contact with your office, your home, emergency services, and others. For the safe and efficient operation of your phone, observe these guidelines.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 higher power level than necessary, and expose that person to RF energy in excess of that established by the updated ANSI Standard. For best call quality, keep the antenna free from obstructions and point it straight up. If you want to limit RF exposure even further than the updated ANSI Standard, maintain a distance from the antenna of more than 4 inches (10 centimeters). Of course, you may also choose to control the duration of your calls.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Turn your phone OFF in health care facilities when any regulations posted in the areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. AIRCRAFT Turn your phone OFF before boarding any aircraft. • Use it on the ground only with crew permission. • Do not use it in the air. To prevent possible interference with aircraft systems, U.S.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269, Attn.: Publications Sales Division.
Applicant: Shintom Co., Ltd.
Applicant: Shintom Co., Ltd.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 1 A lights when the system A (non-wireline) is selected. 2 B lights when the system B (wireline) is selected. Note: AB lights when standard mode is selected. 3 Received Signal Strength Indicator Yi constantly displays the signal strength represented by the number of bars. 4 I lights when a call is in progress. 5 M lights when the mute control is in effect. 6 2-digit display 8.8shows the memory location number and the status of various functions.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 TRANSCEIVER CONNECTIONS Antenna Terminal Power Cable Socket Microphone Unit Jack Curly Cord Socket INSTALLATION CAUTIONS: • Always make sure that any power is disconnected to the vehicle before handling any electrical components like wiring, fuseboxes, connectors, etc. • Never force any connection between components, electrical connectors or the alike. • Always use the proper tools for the task at hand.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 PARTS LIST Your TR93 Kit consists of following parts. Please also refer to the Optional Parts List. 1. Transceiver unit (TR93) 2. Handset (TH93) 3. Cradle 4. Curly cord * (CC91) 5. Power cable (EPC91) 6. Extension cable (EIC91) 7. Mounting bracket (MT91) 8. Clamshell bracket 9. Operating instructions 10. Installation guide * Note: Use specified curly cord only.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 11. Screw kit (SKM46) ( SKM410 ) (SKM435) 12.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 BASIC OPERATION Removing your Handset Replacing your Handset TURNING YOUR PHONE ON AND OFF Your phone will be switched on or off with the vehicle's DC power as you turn the ignition key. If your phone remains off after switching on ignition (or vice versa), press and hold p. Upon power up, your own phone number will be displayed momentarily.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Example: To call 123-4567 1. Enter 123456 7. 2. Press s. Talk with the other party. 3. To terminate the call, press e. YiAB I 1234567 To Correct Entered Digits: • Press c to erase the last digit entered. • Press and hold c to erase the whole number. To View Whole Number (Hidden Digits): Although you can enter up to 32 digits, the display can show the last 14 digits only. To view the whole number, press and hold f key.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 To Activate the Silent Incoming Calls: Press f, 8. “Silent Alert on” will be displayed. To clear the display, press c. To Deactivate the Silent Incoming Calls: Press f, 8 again. “Silent Alert oF” will be displayed. To clear the display, press c. Automatic Answering When this feature is activated in handsfree mode, your phone will automatically answer an incoming call on the second alert. To Activate Automatic Answering: Press f, 9.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 2. Press s for redialing. Automatic Redial (Programmable Option) If Automatic Redial is selected, your phone will automatically continue redialing in 20 seconds if the attempt to reach the cell site is not successful. The I indicator will stay on, but the earpiece speaker will be muted. Note: Automatic Redial will initiate only on a “Cellular System” busy signal but not on a “Line” busy signal.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 ENHANCED OPERATION LOCKING/UNLOCKING THE PHONE You can restrict outgoing calls except for the Programmable One Touch Emergency Call, Emergency (911, 000, 119), and the number stored in the emergency/priority dialing area. Your phone will receive calls normally even if it is locked. Locking the Phone 1. Press f, 5. 2. Enter the 3-digit Unlock code. Notes: • Please contact your selling Audiovox dealer to check the initial Unlock code.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 KEYPAD DISABLE FUNCTION IN HANDSFREE MODE (PROGRAMMABLE OPTION) This function prevents accidental or unintentional use of the keypad in handsfree mode. When this function is activated by Programmable option, no key operations in handsfree mode are possible. The display shows “Keypad Disable” each time your phone is turned on. Note: Even in keypad disable mode, your phone will receive calls normally.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 STORING IN THE MEMORY You can store telephone numbers and names in 89 memory locations. Maximum 32 digits and 7 characters each can be stored in locations 1 to 20. Maximum 16 digits and 7 characters each can be stored in locations 21 to 89. (Entry of name can be omitted.) Name Entry Keys To enter names, the following keys are used: [Alphanumeric Character Entry Keys] Key 1 2 3 4 5 6 7 8 9 0 1st 2nd & A D G J M P T W .
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 The following example shows how to enter the name JOHN. You can learn the characters behind the digit keys and how to move the characters with the cursor keys. Note this example illustrates how to enter a name but not actually store the name. Example: To enter the name JOHN 1. To enter name entry mode, press cf M/A . “ALPHA” will blink. 2. Enter the name JOHN. Press 5 # 6 (J) (J ) (JM) 6 6 # 4 (JN) (JO) (JO ) (JOG) 4 # 6 6.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 The following examples show how to store the telephone number together with name, as well as how to store telephone number alone. Example 1: To store telephone No. 123-4567 with name JOHN in memory location No. 10 YiAB 1. Press c, then enter 123 4567. ALPHA? 2. Press f M/A . 1234567 “ALPHA?” will blink. 3. Enter the name JOHN with the name YiAB entry keys. JOHN 4. Press f R/S . “Store ?” will be 1234567 displayed. 5. Enter 10.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Automatic Storage You can automatically store telephone numbers and names in vacant memory locations. (You may choose to omit names.) 1. Press c, then enter the telephone number. 2. Enter the name. 1) Press f, M/A . “ALPHA?” will blink. 2) Enter the name with the name entry keys. 3. Press f, R/S , R/S . The telephone number and name are automatically stored in the first available vacant memory location. 4. Press c.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Example: To store telephone No. 456-7890 with name JOHN in the vacant memory location No. 13 1. Press M/A , then enter 4567890. 2. Enter the name. 1) Press f m. “ALPHA?” will blink. 2) Enter the name with the name entry keys. 3. Press f R/S . 4. Press ^ or v to search for vacant YiAB 13 memory location 13, for example. JOHN 5. Press R/S . 4567890 6. Press c. Notes: • To exit the Vacant Memory Location Search function, press e.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Editing the Names To edit the name of location No. XX (1-89), follow the next steps. 1. Press R/S , and enter x/xx. 2. Press f, M/A . 3. Edit the name with the name entry keys. 4. Press f, R/S , R/S to store the new name. Note: To exit the editing mode, press e at any time. Editing Phone Number under stored Name To edit phone number under stored name, follow the next steps. 1. Press f M/A . 2. Enter the name with the name entry keys. 3.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Example: To place a call using memory location No. 10 1. Press R/S . YiAB 10 2. Enter 10. JOHN 3. Press s. 1234567 Dialing after Telephone Number Search You can scan, recall and dial numbers stored in memory locations 1 through 89. 1. Press R/S . 2. Press ^ or v to scroll up or down the memory locations. 3. If your desired telephone number is displayed, press s to initiate dialing. Note: To exit the search mode, press e at any time.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 LINK DIALING When you receive service such as Voice Mail from your cellular service provider, you can dial a number and make Link Dialing with M/A key only. Five Link Dialing Memories (M1 to M5) are provided with your phone. Storing Number in Link Dialing Memory 1. Enter a number to be stored. 2. To store the number as non-secret number, press f M/A and enter Link Dialing Memory Number.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 ONE TOUCH DIALING You can place a call with M/A key after storing a telephone number in the one touch memory assigned to M/A key. Storing in the One Touch Memory 1. Press c, then enter a telephone number. 2. Press f, R/S , M/A . Note: The stored telephone number can be reviewed by pressing , . R/S M/A Placing a Call with One Touch Memory 1. Press and hold M/A . 2. The telephone number appears, and the I indicator will light as a call is placed.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 SCRATCH PAD MEMORY As a sort of numerical note pad, you can enter up to 7 entries in special memory locations (memory locations 90 to 96) of up to 32 digits each. Also, you can place a call from the scratch pad memory. The 8th entry scrolls the scratch pad memory and the number entered first is erased. Note: Contents of the scratch pad memory will not be cleared even if the phone is turned off. Storing Numbers in the Scratch Pad Memory 1.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 EXTENDED FEATURES AND FUNCTIONS CALL RESTRICTION In the call restriction mode, only specific keys are effective to prevent unauthorized operation of the phone. Only the following keys are operative to place a call. 1) Any combination of numbers 1 and 2 for a call: • R/S + (1, 2, 11, 12, 21, 22) + s 2) Emergency Calls: • R/S + 9 + 7 + s •9+1+1+s •0+0+0+s •1+1+9+s 3) One Touch Emergency Call: • Holding 1 for 2 seconds.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 CAUTION: Keep the record of new code in a safe place! Note: If you enter a wrong code in step 2, your phone returns to standby mode. KEYPAD (DTMF) TONES Dual Tone Multi-Frequency (DTMF), or “Keypad Tone” signals can be transmitted during a call by entering digits on the keypad or recalling numbers from the memory. By sending the DTMF signals, you can access special services such as voice mail and answering machines that require long duration tone.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Outgoing Call Timer You can display your outgoing call time. 1. Press f, *, 3, 1. 2. Enter the 2-digit Call Timer code. Note: Please contact your selling Audiovox dealer to check the initial Call Timer code. “Outgo-T hhhh:mm” will be displayed. (hhhh: Hours, mm: Minutes) To exit this mode, press c. To reset the Outgoing Call Timer to 0000:00, press *, c. Note: The timer will automatically reset to 0000:00 after 9,999 hours and 59 minutes.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Outgoing Call Counter You can check the accumulated number of outgoing calls. 1. Press f, *, 2, 1. 2. Enter the 2-digit Call Counter code. Note: Please contact your selling Audiovox dealer to check the initial Call Counter code. “Outgo-C XXXX” will be displayed. (XXXX: Number of outgoing calls) To exit this mode, press c. To reset the Outgoing Call Counter to 0000, press *, c. Note: The call counter will automatically reset to 0 after 9,999 calls.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Call Time Warning Tone You can turn the Call Time Warning Tone on and off. When it is set to on, a single warning tone will be heard every 1 minute and a double warning tone will be heard every 5 minutes during a call. To Turn the Warning Tone ON: 1. Press f, *, 1 while not in use. “Beep Tone on” will be displayed. 2. Press c to clear the display. To Turn the Warning Tone OFF: Press f,*,1again while not in use.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Standard Mode: Your phone will scan the preferred system channels. If unable to find an acceptable preferred channel, your phone switches to scan the non-preferred system channels. “A B” will light in the display. System A Only Mode: Your phone will scan the system A only. “A” will light in the display. System B Only Mode: Your phone will scan the system B only. “B” will light in the display.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 CURRENT SID, CHANNEL AND RSSI LEVEL DISPLAY You can see the current SID (System Identification), channel No. and RSSI level at a time. The RSSI is the signal strength of the current channel of operation represented in voltage. The higher voltage shows the better connection and clearer communications. RSSI LEVEL 1. Press f, *, 6. YiAB 3.3 2. To clear the display, press c SID S00006 C0327 CHANNEL NO.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 FUNCTION REVIEW To Review the Function Menus: 1. Press f, then ^ or v. “FNC Review” will be displayed. 2. Press ^ or v to scroll up or down the function menus. 3. Press c to exit the mode. Notes: • You can directly access to “FNC *1” by pressing f, *, ^/v. • You can directly access to “FNC #1” by pressing f, #, ^/v. To Directly Enter the Function Setting Mode: 1. Press f, then ^ or v to search for the desired function menu. 2. Press f.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Display Function FNC *4 1-Touch Emerg. One touch emergency call selection FNC *5 Call Restr.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 Display Function FNC #53 Change C-Count FNC #54 Change C-Timer FNC #* Change PIN FNC ## Multi Reg. Call counter access code change Call timer access code change PIN entry mode Multiple city registration (phone number and SID entry) ENHANCED FEATURE OPERATION The feature operation on the following pages pertains to “Enhanced Features” that may be offered by your cellular service provider.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 “VOICE MAIL” will blink. Press R/S , R/S and use ^/v keys to display the number of received Voice Mail. • When Voice Mail Message is received during alert or conversation, Voice Mail Number or number of received Voice Mail is displayed. Short Message Service • When Short Message Service is received in standby mode, “SHORT MESSAGE” will be displayed. Press or R/S , R/S and use ^/v keys to view the Short Message.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 PROTECT YOUR WARRANTY Read your Warranty carefully, with the special consideration to paragraph seven of the Limited Warranty for your unit. “Warranty does not apply to... or to any product or part thereof which has suffered through alteration...mishandling, misuse, neglect, or accident”. Many companies are making look-alike accessories and in some cases, promoting that their product is equal to or better than the Audiovox product. Be careful.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 GENERAL SPECIFICATIONS Frequency Range: Transmit: Receive: 824.040 to 848.970 MHz 869.040 to 893.970 MHz Number of RF Channels: 832 Channels, Full Duplex Channel Spacing: 30 KHz Duplex Spacing: 45 MHz Frequency Stability: ±2.5 PPM Operating Temperature: Main Unit: –22°F to +140°F (–30°C to +60°C) Supply Voltage: 13.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 TABLE OF KEY OPERATION KEY OPERATION Function p Holding p turns your phone on and off. Phone No.+f+1 Stores to Scratch Pad Memory. f+3 (During conversation) Turns the DTMF tone on and off. f+5+3 Digit Code Locks your phone electronically. f+6+^ Displays current scan mode. f+6+^+^.... R/S Selects Scan Mode. f+7+1 +3 Digit Code+^/v+ R/S Turns the Message Mode on and off. f+7+2 Turns the Message Beep on and off.
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 KEY OPERATION Function f+*+5 +3 Digit Code Activates the Call Restriction mode. f+*+6 Displays the current SID, current Channel and the RSSI Level. f+*+9+0 +^/v Adjusts the earpiece volume level. f+*+9+1 +^/v Adjusts the alert sound output volume level. f+*+9+2 +^/v Adjusts the tone volume level. f+*+9+3 +^/v Adjusts the Message Beep volume level. f+#+1 Displays own telephone number. f+#+2 Displays the Electronic Serial Number (ESN).
Applicant: Shintom Co., Ltd. Transmitter Type: BFYT3017 KEY OPERATION Function Phone No.+f+ R/S +Memory Location No. Stores the telephone number in the memory. Phone No.+f+ M/A +Name.+f+ R/S +Memory Location No. Stores the telephone number and the alphanumeric information in the memory. Phone No.+f+ R/S + R/S Searches the vacant memory and stores the telephone number automatically. Phone No.
Applicant: Shintom Co., Ltd.