User's Manual

05
Baby Monitor
Operating Instructions
Ⅶ.Operate instruction
1.Camera side button instruction
Power switch: Power on/off, the indicator LED will
light.
Register: Press and hold on can register the camera
side with receiver side, when registering the indicator
LED will flicker. You can loose the button when it is
registered successfully.
Reset button: Press this button will reset system.
2.Receiver side button instruction
Reset button: Reset system in any case when press
this button.
The functions of other buttons are different when in
different status. Detailed instructions are as follows:
Under the video monitoring status:
(1)Up/Down: Used to change channels by different
sequence. When changed channel, it will display the
number of current channel (CH1, CH2, CH3, CH4 or 4
images viewing). The receiver can maximum register 4
cameras at the same time.
Channel changes as below:
4 registered cameras:
Ch1 Ch2 Ch3 Ch4
images
Ch1 Ch2 Ch3
images
Ch1 Ch2
images
images
Ch1 Ch1
3 registered cameras:
2 registered cameras:
1 registered cameras:
135 x9 0mm 内 页