User's Manual

Table Of Contents

Baby Monitor

Operating Instructions

Ⅱ. Power on/off

Camera: Press the switch to power ON/OFF. When

the power indicator LED is green, the product is ready to

be operated. If the LED doesn’t light please replace the

battery or recharge.

Receiver: Press the Power switch to Power on/off. When

the power indicator LED is blue means the receiver is

now ready to operate, if not, please replace the batteries

or recharge the receiver. The first time to power on, you

should to register the camera to the receiver successfully.

Ch1

Intensity of the single

Battery capacity of the camera

Battery capacity of the receiver

Ⅲ.Register/Logout

Video monitoring status:

Press “Ok” button of the receiver, choose “setting” and

then choose “register”. Select the transmission number

and press “OK”, there will be the register information

from the transmitter camera. Press “OK” to turn to the

key on the transmitter camera and hold for seconds. The

transmitter camera has been register success, there will

be hint on the receiver interface. If failed please repeat

this process or check the capacity of the battery.

Logout: Turn on the transmitter. Press “OK” button of the

indication of two-way communication:

Channel of the camera

A+

135 x9 0mm 内页