M U LT I M E D I A A U D I O A N D V I S U A L Instruction Manual MODEL : SB-5688LCM 8x8 HDMI MATRIX SWITCHER HDMI Matrix Switcher Series Thank you for purchasing the SB-5688 HDMI Matrix Switcher. You will find this unit easy to install and highly reliable but it is essential that you read this manual throughly before attempting to use 8x8 HDMI Matrix switcher.
SAFETY INFORMATION WARNING! CAUTION RISK OF ELECTRIC SHOCK T THE RISK OF FIRE OR ELECTRIC TO REDUCE I SHOCK DO NOT OPEN DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. . This symbol is intended to alert the user to the presence of uninsulated of uninsulated “dangerous voltage” within the products enclosure that enclosure tha may be of sufficientmagnitude to constitue a risk of electric shock to persons.
TABLE OF CONTENTS TABLE OF CONTENTS _____________________________________________________ 03 _____________________________________________________ INTRODUCTION AND PACKAGE CONTENTS 04 _____________________________________________________ FEATURES 05 _____________________________________________________ SPECIFICATIONS 06 _____________________________________________________ EDID FUNCTION - EDID SETUP 07 _____________________________________________________ EDID FUNCTION - EMBEDDED EDID 08 __________________
INTRODUCTION AND PACKAGE CONTENTS INTRODUCTION The SB-5688 is high-performance 8x8 matrix routing switcher for HDMI signals. This switcher supports data rates up to 6.75 Gbps, enabling 1080p HDMI formats and UXGA/WUXGA/DVI resolution to any HD display. High Definition Digital signals can be selected and distributed to any 8 outputs simultaneously. The Switcher is certified as being fully HDMI and HDCP compliant, with RoHS,CE,FCC certification.
INTRODUCTION AND PACKAGE CONTENTS FEATURES 1. 2. 3. 4. 5. 8x HDMI digital source devices matrix switched to 8x HDMI devices. HDMI digital video w/embedded audio, DVI format and CEC/HDCP 2.0 compliant Seven (7) function key control and worldwide (8) EDID modes for HDTV resolutions. Link speeds of up to 6.75 Gbps (link clock rate of 340Mb Hz), Support HDMI 1.4a 3D formats. Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV resolutions 480i/480p, 576i/576p, 720p, 1080i & 1080p 6.
SPECIFICATIONS SPECIFICATIONS Type of HDMI Switcher 8x HDMI inputs To 8x HDMI Outputs Matrix Switcher HDMI Support HD 1080P-@60Hz, H36-bit Deep color, 3D (1.4a) formats. HDCP / CEC Support HDCP 2.0 Compliant, CEC Compliant. Video Bandwidth Double Data Rates:340Mhz, Total 6.75Gbps bandwidth. Digital Video Support Full HD resolution : 480i / 480p / 720p / 1080i / 1080p Digital Audio Support Multi Audio Formats 5.1 / 7.1, MAT(MLP) Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.
EDID FUNCTION EDID function Setup EDID setup To change the EDID setup Step 1 . Press the EDID button The display will show the currently selected EDID mode Step 2 . Press SOURCE #1 or #2 button row The button will flash blue and the display will show the current Embedded EDID Status. Step 3 . Press the ENTER button To set EDID mode. The switcher will return to operation mode. Operation will abort if no keys are pressed within 5 seconds. 6.
EDID FUNCTION EDID function for HDMI Matrix Switcher 6.2 LEARNING EDID Learning EDID from Destination to Source Learning EDID setup Press EDID > DESTINATION > SOURCE > ENTER Press EDID > DESTINATION Button: The LCM will be show LEARNING. EDID LEARNING Switcher will LEARN destination EDID and pass the selected source. NOTE : The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
EDID FUNCTION EDID function : 8x Embedded EDID Modes Mode 1 . FSS R (Fast Speed Start) EDID 1. FAST SPEED START Mode 2 . H24-3D (1080p-24 bits) EDID 2. H24-3D, PCM 2CH Mode 3 . H24-3D-M H36-3D DVI Support : DVI-D 1280x1024 60Hz 1920x1200-60Hz (DVI-D) EDID 7.1920 x 1200-60HZ DVI-D Mode 8 . Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH 1280x1024-60Hz (DVI-D) EDID 6.1280 x 1024-60HZ DVI-D Mode 7 .
EDID FUNCTION EDID Function : LEARNING 6.2.1 Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5. Step 1 . Press EDID button The button will flash blue and the display will show the current Embedded EDID Status. Step 2 . Press the Destination #8 button row Copy the Destination #8 Display EDID. Step 3 . Press the Source #5 button row Learning the Destination #8 EDID To Source # 5. Step 4 . Press ENTER button To confirm entries. 6.2.2 Step 4.
EDID FUNCTION EDID function for HDMI Matrix Switcher 6.3 EDID status To view the current EDID status. Step 1 . Press EDID button The button will flash blue and the display will show the current Embedded EDID Status. Step 2 . Press EDID button To exit. R 6.4 How to setup FSS Function R Fast speed start Step 1 . Press the Destination #1~8 button row To setup and Install all devices. Then Press the Source #1~8 button row Step 2 . Press EDID button Select a optimum status of Embedded EDID mode.
FRONT PANEL FRONT PANEL SB-5688 OUTPUT 1 2 3 4 5 6 7 8 SOURCE 8 7 6 5 4 3 2 1 1 AL L OF F 1 SOURCE STATUS 3 4 5 6 7 RECALL ENTER 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 8 DESTINATION DESTINATION ED ID LO CK MEMORY SOURCE POWER 1 2 8x8 HDMI MATRIX SWITCHER IR 3 6 2 7 SOURCE 5 4 POWER SWITCH The power switch turns the unit on and off. The LCM will illuminate red to indicate that the switcher is ON and is receiving power.
FRONT PANEL FRONT PANEL SB-5688 OUTPUT 1 2 3 4 5 6 7 8 SOURCE 8 7 6 5 4 3 2 1 1 2 SOURCE STATUS 3 4 5 6 7 AL L OF F ED ID RECALL ENTER 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 DESTINATION DESTINATION LO CK MEMORY SOURCE POWER 8 9 8 1 8 8x8 HDMI MATRIX SWITCHER IR 10 SOURCE 11 FUNCTION KEY - ALL OUTPUT 1 2 3 4 5 6 7 8 ALL 1 1 1 1 1 1 1 1 Disables (mute) video on all destinations OR Selects the same source to all destinations. Option 1 - Press ALL followed by OFF button.
FRONT PANEL FRONT PANEL SB-5688 OUTPUT 1 2 3 4 5 6 7 8 SOURCE 8 7 6 5 4 3 2 1 1 2 SOURCE STATUS 3 4 5 6 7 AL L OF F ED ID RECALL ENTER 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 DESTINATION DESTINATION LO CK MEMORY SOURCE POWER 14 12 1 8 8x8 HDMI MATRIX SWITCHER IR 13 12 SOURCE 15 FUNCTION KEY - MEMORY MEMORY D-02 1 2 3 4 5 6 7 8 2 2 2 2 2 2 2 2 MEMORY S-05 1 2 3 4 5 6 7 8 2 2 5 5 8 8 1 1 The system will show store presets, up to a total of 16.
REAR PANEL 5 REAR PANEL OU TPUT 8 OU TPUT 7 OU TPUT 6 OU TPUT OU TPUT 5 4 OU TPUT 3 OU TPUT 2 OU TPUT 1 8x8 HDMI MATRIX SWITCHER HDCP FULLY SUPPORTED 8 7 6 5 4 3 2 1 PREVIEW RS232 IR EXT. INPUT DC 12V 3 2 1 RoH S RoHS/ 95/ EC INPUT INPUT INPUT INPUT INPUT INPUT 6 1 IR EXTENDER CONTROL Support one of IR Extender Extend distance maximum 300Meters / ~1000 feet When you plug the External IR extender into the switcher, the front panel IR receiver remain active.
TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using IR Transmitters (SB-101) and IR Receiver (SB-100) with SB-6335T & SB-6335R to control a projector. NOTE: 1. IR Control Projector Over HDBaseT Extender: SB-6335 HDBaseT Transmitter SB-6335R HDBaseT Receiver 2. Preview Output : Picture as same OUTPUT-1 3. RS-232 Control 4. External IR Remote. 5. IR Extender Transmitter : SB-101 IR Extender Transmitter. 6. IR Extender Receiver : SB-100 IR Extender Receiver.
TYPICAL APPLICATION 8x8 HDMI MATRIX SWITCHER INSTALLING DIAGRAM Sample connection using IR Transmitters (SB-101) and IR Receivers (SB-100) with SB-6335T and SB-6335R to control a Satellite Receiver. Audio Amplifier NOTE : 1. IR Control Satellite Receiver Over HDBaseT CAT5e/6/7 Extender from room: SB-6335 HDBaseT CAT5e/6/7 Transmitter SB-6335R HDBaseT CAT5e/6/7 Receiver 2. Audio Extractor To Recode Audio : SB-5609 HDMI Audio Extractor. 3. Control HDMI ARC: SB-5610 ARC Control Box. 4.
REMOTE CONTROL Before making any connections to the switcher. Observe the following: > Ensure the mains voltage supply matches the label on the supplied plugPack (+/- 10%) > Connect all audio video sources and destination equipment > power up all source and destination audio-visual sources > Ensure that the power switch is OFF > For each destination output select the appropriate input source by using > Ensure that all system grounds (earth) are connected to a common point.
REMOTE CONTROL IR REMOTE CUSTOM AND DATA CODES (NEC Standard) HOW TO SETUP IR CODES : ALL OFF EDID LOCK RECALL MEMORY ENTER CUSTOM CODE : 09F6 POWER ON : 09F6 A15E POWER OFF : 09F6 A25D : : : : : : : 09F6 09F6 09F6 09F6 09F6 09F6 09F6 B04F B14E B748 B54A B24D B44B B34C PRESS DESTINATION - # then PRESS SOURCE - # DESTINATION DESTINATION DESTINATION DESTINATION DESTINATION DESTINATION DESTINATION DESTINATION #1 #2 #3 #4 #5 #6 #7 #8 : : : : : : : : 09F6 09F6 09F6 09F6 09F6 09F6 09F6 09F6 SOURCE SO
IR EXTENDER REAR PANEL IR EXTENDER PORT IR EXTENDER CONNECTION RoHS/95/EC INPUT ROO M DC 12V SB-100 RS - 232 IR EXT.
CONSUMER ELECTRONICS CONTROL (CEC) CONSUMER ELECTRONIC CONTROL (CEC) In brief, CEC allows HDMI devices to control each other when necessary and allows the user to operate multiple devices with one remote control handset. To Enable CEC - Press EDID button - Press ALL button - Press EDID button The pre-set configuration will execute. To Disable CEC - Press EDID button - Press OFF button - Press EDID button The pre-set configuration will execute. Not all device support CEC.
RS-232 SERIAL INTERFACE RS-232 SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual.
LIMITED WARRANTY LIMITED WARRANTY SHINYBOW WARRANTY SHINYBOW Technology warrants this product against defects in materials and workman ship for a period of 3 years from the date of purchase. Should this product, in SHINYBOW Technology's opinion, Prove defective within this warranty period, SHINYBOW Technology, at its option, will repair this product without charge, to whatever extent it shall deem necessary to restore said product to proper operation condition. This does not extend the warranty period.
MU LT IME DIA AU DIO AND V IS U AL www. shinybowUSA.