Instruction manual

EDID function for HDMI Matrix Switcher
PAGE 11SB-5688 INSTRUCTION & OPERATION MANUAL
EDID FUNCTION
2. To set up learning between a single destination and single source:
Press EDID button > Press Destination 1 thru 8 > Press Source 1 thru 8 > Press ENTER to confirm.
Switcher will learn destination EDID to source device.
3. To set up learning between a single destination and Multiple sources:
Press EDID button > Press Destination 1 thru 8 > Press the majority Sources 1 thru 8 > Press ENTER.
Switcher will learn single destination EDID to many source devices.
4. How to Learning single destinations with all sources.
Press EDID button > Press ALL button > Press ENTER to confirm.
Example for single source
Destination > press #1 and then Source > press #1
Destination device #1 will set to the highest common resolution and Audio of source #1
Example for multiple sources
Destination device #1, #2, #3 will be set to the highest common resolution and Audio
available and source device #1 will output this same resolution.
6.6 Auto mode definition Common Resolution and Audio
Switcher will find highest common Resolution and Audio from all destination EDID
to link Source.
6.4
Step 2 . Press EDID button
Fast speed start
Select a optimum status of Embedded EDID mode.
How to setup FSS Function
Step 4 .
Press EDID button To select the EDID FSS mode.
Step 5 . Press ENTER button To conform entries.
Step 1 .
Press the Destination #1~8 button row
To setup and Install all devices.
Then Press the Source #1~8 button row
R
R
Step 3 .
Press ENTER button
To conform entries.
R
6.3 EDID status
Step 1 .
Press EDID button
Step 2 .
Press EDID button
To view the current EDID status.
The button will flash blue and the display will show
the current Embedded EDID Status.
To exit.
1. Switcher will LEARN destination EDID and pass the selected source.
6.5 LEARNING EDID definition Learning EDID from Destination to Source