• •
Depending on different models, not all features may be available in this general manual. Contents Introduction..................................................................................................... 2 Physical Details................................................................................................ 4 What the symbols mean .................................................................................. 5 Setting up your telephone .................................................
Introduction Overview Thank you for purchasing our DECT product for Skype™. We hope that you spend many happy hours in using it and chatting with Skype™! With the SK7711 you can make landline calls and Internet calls using Skype™, SkypeOut™ and Skype™ Voicemail. A landline call is a call between two telephone line subscribers. A Skype™ call is between two registered Skype™ users. These calls are free of charge.
Package Content Please check the box contents for completeness. If any parts are missing, return complete box to your supplier. • • • • • • • • • 1 cordless handset 1 base unit 2 Rechargeable AAA battery 1 telephone line cable (different from country to country) 1 USB line cable 1 mains power lead and adaptor (different from country to country) 1 Charger pods (not available for single handset) 1 CD Installation 1 User manual Note: Keep your proof of purchase to support any guarantee claim.
Physical Details The Handset and Base Unit Menu / Mute button Phonebook / OK button Press to enter menu mode and enter sub-menu. Press to confirm selection. With the key " " to lock the keypad. Press during a call to mute the microphone In standby mode, press to enter phonebook menu Press to confirm selection. INT button Press to make an intercom call (if you have more than one handset) Call/ Recall button Press to begin and answer a telephone call.
What the symbols mean Batteries Charge Level Whenever this shows ‘nearly empty’ ( ), put the handset on the base unit to charge the batteries. While the batteries are being charged, the level shown will keep changing. Mute Your handset's microphone is muted. Signal Level Shows the signal between the handset and base unit, and disappear when you are out of range of the base unit. Speakerphone Your handset’s loudspeaker is on. Lock Your handset’s keypad is locked.
Setting up your telephone Connection and conditions for use You can connect your SK7711 to a direct exchange line (DEL), a line connected to a local exchange, with its own phone number; to an extension socket connected to a DEL; or to an extension on an approved compatible PBX. Do not connect the SK7711 as an extension to a payphone. How many phones can you connect? The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.
Installation 1. Choose a suitable site for the base unit. Make sure it is not near to another telephone, nor to other electrical equipment. 2. Plug the mains power lead into the power port, the telephone line cord into the phone line port and the USB line cord into the USB port. 3. Plug the mains adapter into a 230 V AC, 50 Hz mains socket with the switch on the socket set to OFF. Note: The illustration of adaptor may vary from country to country. 4.
Note: Your SK7711 is supplied with the handset already registered to the base unit; you shouldn't need to register it. Refer to Settings section of this manual for the information on how to register. 7. Download the latest version of Skype™ from http://www.skype.com/. This is a Windows-based installation. If you have previously installed the Skype™ software, proceed to the next step. 8. Mount the CD-ROM provided into your PC CD ROM Drive and install the program.
Important safety information This equipment is not designed for making emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency services. (This means that you should also have a basic phone that does not need mains power, connected to your line so that you can make calls during a power failure) People with a heart pacemaker should consult their doctor before using the telephone.
Making and Answering Calls To Make an Ordinary Call • • Enter the telephone number and press Call button to place call; If you make a mistake, press Clear button to delete incorrect digits one by one, before you press Call button. To Make a SkypeOut™ Call SkypeOut™ allows you to use your Internet connection to call ordinary telephones and mobile telephones worldwide. Requires the SkypeOut™ service from Service Provider for landline calls first.
To Answer a Call • • When the handset and base unit ring, press the Call button to answer call. When you are engaged on an ongoing call, you can use a headset to communicate with the caller. When the AUTO TALK is turned on, you can simply answer the call by lifting the handset from the base unit (see AUTO TALK part). Note: You can press End button directly to reject the call if you do not want to answer it. To End a Call • Press End button to hang up.
Earpiece Volume • During a call, you just press Scrolling button up/down to adjust the volume of the earpiece. To Mute the Mouthpiece 1. During a call, press Mute button once to mute the mouthpiece; 2. While the mouthpiece is muted, you cannot press any number key to send digits down the line; 3. Press Mute button again to get back to the Call. Call Waiting SK7711 DECT has a Call Waiting feature that works with Caller ID service from your telephone service operator.
Conference Calling You need to register with your fixed line network operator for conference calling service. It is dependant on service availability and subscription. To Make an Ordinary Conference Call: 1. 2. 3. 4. Connect the first party; Press INT key, and the first party is put on hold; Dial second party’s phone number; When connected, press and hold “#” button to connect the three parties together. To Make a Skype™ Conference Call: 1.
To Check the Details of Phonebook Number 1. In standby mode, press Phonebook button, the display shows the stored number; 2. Press Menu button or OK button, and goes to the location Details; 3. Press Menu button or OK button, the display shows the details of the phonebook number. To Delete a Number or All Numbers from Phonebook 1. Under Phonebook mode, press Scrolling button to scroll through the stored numbers; 2.
Call Lists You must subscribe to Caller ID service from your service provider to use this feature. Call Logs store information related to Received calls, Dialed calls and Missed calls. SK7711 can store up to a maximum of 30 calls, consisting of 10 Received, Missed and Dialed calls respectively. To Check Call Records 1. Select Call Logs under menu mode; 2. Press Menu button or OK button again, the display shows Received, Dialed, Missed and Notify; 3.
To Make SkypeOut™ Call from Call List 1. Select Call Logs under menu mode; 2. Press Menu button or OK button again, the display shows Received Calls, Dialed calls, Missed Calls, and Notify; 3. Select the calls-type from Received Calls, Dialed calls, Missed Calls by Scrolling button, then press Menu button or OK button, the display shows these calls numbers; 4. Select one number you wish to call, then press Menu button or OK button, and Scrolling button to the location Skype Out; 5.
Settings Handset Setting To Enter Handset Settings Mode 1. Select Setting under menu mode; 2. Press Menu button or OK button, select HS Set under Setting mode; the display shows Baby Call, Ringer, Auto-Talk, HS Name, Language. To set Baby Call With baby call option turned on, you cannot make any outside call except to a number you have programmed in. When you press any digital key, the programmed number will be dialed out automatically. To set the Baby Call number 1.
4. Press the Menu button or OK button again, the display shows the stored number 5. Press the CLEAR button to clear the digits; 6. Press the Menu button or OK button to confirm, and the display return to the previous menu; Note: you should exit Baby Call mode before change the baby call number. To Set External Ringer Melody (1-9 melody) 1. Select < Sound > under HS Set mode; 2. Press Menu button or OK button to confirm, then Scrolling button to the location Ext Ring; 3.
Auto Talk Function Normally, you need to press the Call button to answer an incoming call. But with AUTOTALK function turned on, when your handset is ringing for an incoming call, you can answer the call by simply lifting the handset from the base unit without pressing the Call button. To Set Auto-Talk Function ON/OFF 1. Select under HS Set mode; 2. Press Menu button or OK button, and Scrolling button to set Auto-talk On/Off; 3.
Base Setting To Enter Base Settings Mode 1. Select Setting under menu mode; 2. Press Menu button or OK button select Base Set and the display shows Ringer Set, Dial Set, Barring, LCR, PIN, Default To Set Base Volume 1. 2. 3. 4. Select < Ringer Set> under Base Set mode; Select < Volume> under Ringer Set; Press Menu button or OK button and Scrolling button to select low / high; Press Menu button or OK button to confirm. To Set Base Melody (1-9 melody) 1. 2. 3. 4.
Call Barring Function Call barring enables you to restrict or bar certain types of calls from your phone. To Set Call Barring Number 1. Select < Barring> under Base Set mode; 2. The display shows BarringNo, press Menu button, or OK button then key in the PIN (the default PIN is 0000); The display shows the numbers from 1 to 5 (the maximum call barring numbers you can set) 3. Press Menu button or OK button and then key in the telephone number you want to set call barring. 4.
2. Press Menu button or OK button, and key in the current PIN number; 3. Press Menu button or OK button to confirm, you will hear a beep, then all features will return to their default settings. Registration Your SK7711 is supplied with the handset already registered to the base unit; you shouldn't need to register it. But if you've bought extra handset, you'll need to register each one to your original base unit. Maximum 4 handsets can be registered to one base. To Enter Registration Mode 1.
Extra Setting To Set Time /Date 1. 2. 3. 4. Select < Time/Date > under EXTRA mode; Press Menu button or OK button, then key in the date; Press Menu button or OK button to confirm, key in the time; Press Menu button or OK button to save the setting. To Set Alarm Time 1. 2. 3. 4. 5.
To View the full name of the contact If the number of the characters of your contact is more than 6, the display cannot show the whole full name, you can follow the instruction as shown below to check the full name: 1. 2. 3. 4. 5. Select Skype under menu mode; Select < Contacts > under Skype mode; Press Menu button or OK button, then the display shows the Skype™ user list; Press Scrolling button to select the record you want to view; Press OK button to view the full name of the contact.
Resetting the system If you have set a PIN and forgotten it, you need to reset the system. The PIN will be reset to 0000. If you reset the system, you will lose all stored information (including numbers in memory) and all features will return to their default settings. You need to register the handset to the base unit again. While you are resetting the system, you should disconnect the telephone line cord from the back of the base unit, so you won't be interrupted by incoming calls.
To transfer the outside call to another outside phone (Network Depending): 1. Press the Recall button and key in the call number you want to transfer. 2. The outside call is put on hold. When the call answers, you can speak to the user, then press the End button to hang up and transfer the call. Troubleshooting Always check first that: • • • • You have followed the steps listed on pages to install and set up your SK7711. All connects are firmly inserted in their sockets.
When I place Skype™ call, there is no sound. • • Check the network. Check Skype™ interface by following way. Click Tools at the Skype™ interface menu bar and select . Then select to enter configuration page. Select SK7711-A in
The CHARGE light on the base unit does not come on. • • • Check the handset is properly stationed. Check the connections between the base unit and mains power socket. Clean the batteries charging contacts with a dry cloth. When I press the CALL button, I hear a loud noise. • The strange noise is caused by interference. Disconnect the mains power lead from the back of the base unit, and then wait for 30 seconds before reconnecting it. There is 'beep'sound while I am on a call.
Technical details Full DECT GAP Compatible system Frequency range 1.88 to 1.9 GHz Channel bandwidth 1.728 MHz Modulation GFSK Operating range Up to 300 m outdoors; Up to 50 m indoors Operating time Standby time: 100 hours Talking time: 10 hours Temperature range Operating 00C to 400C Storage -200C to 600C Electrical power Handset--- 2 x 1.2 V 750 mAh Ni-MH, Rechargeable battery cell Base unit---input 230 V AC, 50 Hz; output DC 9 V, 1000 mA.
Declaration of conformity The SK7711 complies with the essential protective requirements and objectives of: • • • EC R& TTE Directive 1999/5/EC EC Low Voltage Directive 73/23/EEC EC EMC Directive 89/336/EEC And conforms to the following relevant harmonized standards: • • • • • • • • TBR 10:1999 TBR 22:1997 TBR 38:1998 EN 301406 V1.5.1:2003 EN 301437 V1.1.1:1999 EN 301489-01 V1.4.1:2002 EN 301489-06 V1.2.
