• User Manual • SC3128 Caller ID Phone
SC3128 User Guide ! • Please ensure the phone is placed in a dry and ventilated place without corrosive air. • Please install 3 x AA batteries for viewing the LCD display. If the LCD does not display clearly, please change the batteries to ensure the normal function of the unit. • Before operation, please check if you had applied for caller ID service from Telecom for caller ID display. Please remove any branch box or abuse resistant device to avoid failure in receiving incoming call number.
SC3128 User Guide TABLE OF CONTENT PRODUCT OVERVIEW ..................................................................................... 3 1. INSTALLING OR REPLACING THE BATTERY ......................................................... 4 2. SWITCH OPERATION................................................................................... 4 VOLUME switch ........................................................................................ 4 RINGER switch .................................................
SC3128 User Guide PRODUCT OVERVIEW 17 18 19 1 16 2 15 14 13 3 4 5 12 6 7 8 10 11 9 Description: 1. LCD Display 11. FLASH/SNOOZE key 2. OUT key 12. Handset Cord jack 3. COPY/PICKUP key 13. DELETE key 4. MODE/ALARM key 14. SET/STORE key 5. PHONE BOOK KEY 15. IN USE Led 6. 0-9/#/* key 16. TEL LINE jack 7. PAUSE key 17. VOLUME switch 8. FILTER/MUTE 18. RINGER switch 9. HF (HANDSFREE) key 10.
SC3128 User Guide 1. INSTALLING OR REPLACING THE BATTERY Install 3 Alkaline AA batteries into the battery compartment and re-fit the cover before use. IMPORTANT—before removing the battery compartment cover, ensure the base unit is disconnected from the telephone line. Connection and conditions for use You can connect your SC3128, to public networks in the United Kingdom or to an approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax machines, etc.
SC3128 User Guide French/ German/ Spanish/ Italian/ Danish/ Turkish). AREA CODE LCD will display SET AREA CODE, press SET key to enter menu setting, The LCD will display ------, press UP key to set the value. Press SET key again to confirm. Change other value using UP key again. Area Code is used to filter the number for incoming calls. E.g. Area code = 75 when there’s incoming call with 75 6554556, it will be displayed as 655 4556 only.
SC3128 User Guide PHONEBOOK LCD will display PHONEBOOK EDIT, press SET key to enter menu EDIT setting, The LCD will display INPUT PREFIX, press SET key again to locate all the names that start with the alphabet/character. Press DELETE key to edit the phone number. Press SET key follow by DELETE or numeric key to edit the name. 4. FUNCTION KEY SETTING UP key Press UP key to view the information of the incoming calls including phone number, date and time.
SC3128 User Guide MODE/ALARM key For MODE function: When checking incoming calls, press MODE key and you will see on the LCD, NORM VIP REJ REV. Use UP key to select the option and press MODE key again to enter. Press UP key to check the information stored in this area and press DEL key to delete. For ALARM function: Press ALARM key and you will see on the LCD ALARM OFF. Use UP key to turn it on and press SET key to set the ALARM TIME show on LCD.
SC3128 User Guide FLASH (600ms) / SNOOZE key In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press REDIAL/BACK key or dial out another number. 5. ADDITIONAL NOTES INCOMING CALL LCD INDICATOR During a phone call, the LCD will display the phone number with name, date, time and a serial number. This is provided you have subscribed Caller ID service from your local telecom. A new number will have a NEW icon, and a repeated call with the same number will have a REP icon.
SC3128 User Guide DECLARATION OF CONFORMITY The telephone complies with the essential protective requirements and objectives of: • EC R& TTE Directive 1999/5/EC • EC Low Voltage Directive 73/23/EEC • EC EMC Directive 89/336/EEC And conforms to the following relevant harmonized standards: • EMC: EN55022, EN55024 • Safety: EN 60950 Created on 28th October 2005. SC3128 Caller ID Phone. Please visit us at www.shirocorp.com.
