OPENRUN PRO User Guide S810
ON/OFF Turn on the headphones Power/Volume+ Button Volume- Button Press and hold the Power/Volume+ Button for 2 seconds until the LED Indicator flashes blue. Turn off the headphones Press and hold the Power/Volume+ Button for 2 seconds until the LED Indicator flashes red.
Pairing 1. Start with OpenRun Pro turned off. 2. Press and hold the Volume+ Button for 5 the LED Indicator flashes red and blue.
Pairing Settings BLUETOOTH OpenRun Pro by Shokz 3. Open your device's Bluetooth settings and select " OpenRun Pro by Shokz." Audrey will say "connected.
Multifunction Button Multifunction Button Play/pause music Answer call Click once Click once Next song End call Double-click while music is playing Click once Previous song Triple-click while music is playing
Download the Shokz app Manage multipoint pairing, upgrade firmware, change EQ modes, and more! Download the Shokz App to easily control headphone settings. *Only for limited regions, go to userguide.shokz.
Please refer to the following for more details https://www.userguide.shokz.
Storage and Maintenance Store the headphones in cool and dry place. The working temperature should be 0~45℃(32~113°F). Working in a cold/hot environment or a highly humid area or an extremely low air pressure may reduce the battery life. Keep the product away from heat sources, direct sunlight, combustible gas or other liquids. Keep the charging port dry before connecting to charger will reduce the risk. The headphones are water resistant, but are NOT waterproof.
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
essential requirements and all other applicable United Kingdom’s regulations. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz’s authorised representative in the UK is Pinpoint Consumer Electronics Ltd., Unit 35, Meridian House, Roadd One, Winsford Industrial Estate, Winsford, Cheshire CW7 3QG.
