MODEL W1844 WALL-MOUNT DUST COLLECTOR W /CANISTER FILTER OWNER'S MANUAL (FOR MODELS MANUFACTURED SINCE 5/17) Phone: (360) 734-3482 • Online Technical Support: techsupport@woodstockint.com COPYRIGHT © AUGUST, 2017 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use.
OPERATIONS....................................... 20 General........................................... 20 Machine Storage................................. 20 SAFETY................................................6 Standard Machinery Safety Instructions....... 6 Additional Safety for Dust Collectors.......... 8 ACCESSORIES....................................... 21 PARTS............................................... 29 Main............................................... 29 WARRANTY.......................
INTRODUCTION Model W1844 (For Machines Mfd. Since 5/17) INTRODUCTION Woodstock Technical Support This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product.
INTRODUCTION Model W1844 (For Machines Mfd. Since 5/17) MODEL W1844 WALLMOUNT DUST COLLECTOR WITH CANISTER FILTER Product Dimensions Weight........................................................................................................... 62 lbs. Width (side‐to‐side) x Depth (front‐to‐back) x Height................................... 19‐1/2 x 22 x 46 in. Footprint (Length x Width).............................................................................. 14 x 14 in.
INTRODUCTION Model W1844 (For Machines Mfd. Since 5/17) Main Specifications Operation Dust Collector Type.............................................................................. Single‐Stage Approved Dust Types.................................................................................... Wood Filter Type...................................................................................... Canister Filter Airflow Performance........................................................................
Identification Become familiar with the names and locations of the controls and features shown below to better understand the instructions in this manual. Paddle Switch w/Removable Key Wall Bracket Motor Inlet Canister Filter Filter Cleaning Handle Collection Bag To. reduce. your. risk. of. serious. injury. or. damage. to. the. machine,. read. this. entire.manual.BEFORE.using.machine. -5- INTRODUCTION Model W1844 (For Machines Mfd.
Model W1844 (For Machines Mfd. Since 5/17) SAFETY SAFETY For.Your.Own.Safety, Read.Manual.Before.Operating.Machine The. purpose. of. safety. symbols. is. to. attract. your. attention. to. possible. hazardous. conditions.. This. manual.uses.a.series.of.symbols.and.signal.words.intended.to.convey.the.level.of.importance.of.the. safety.messages..The.progression.of.symbols.is.described.below..Remember.that.safety.messages.by. themselves. do. not. eliminate. danger. and. are. not. a. substitute. for. proper.
Model W1844 (For Machines Mfd. Since 5/17) FORCING.MACHINERY..Do not force machine. It will do the job safer and better at the rate for which it was designed. NEVER.STAND.ON.MACHINE..Serious injury may occur if machine is tipped or if the cutting tool is unintentionally contacted. HAZARDOUS.DUST..Dust created while using machinery may cause cancer, birth defects, or long-term respiratory damage.
Model W1844 (For Machines Mfd. Since 5/17) SAFETY Additional Safety for Dust Collectors INTENDED.USE. This dust collector is only intended for collecting wood dust and chips from woodworking machines. DO NOT use this dust collector to collect metal, dirt, pebbles, drywall, asbestos, lead paint, silica, liquids, aerosols, or any flammable, combustible, or hazardous materials. EMPTYING.DUST. When emptying dust from the collection container, wear a respirator and safety glasses.
Model W1844 (For Machines Mfd. Since 5/17) ELECTRICAL Circuit Requirements This machine must be connected to the correct size and type of power supply circuit, or fire or electrical damage may occur. Read through this section to determine if an adequate power supply circuit is available. If a correct circuit is not available, a qualified electrician MUST install one before you can connect the machine to power.
Model W1844 (For Machines Mfd. Since 5/17) Grounding Requirements This machine MUST be grounded. In the event of certain types of malfunctions or breakdowns, grounding provides a path of least resistance for electric current to travel—in order to reduce the risk of electric shock. Improper connection of the equipment-grounding wire will increase the risk of electric shock. The wire with green insulation (with/without yellow stripes) is the equipmentgrounding wire.
Model W1844 (For Machines Mfd. Since 5/17) Converting Voltage to 240V The voltage conversion MUST be performed by an electrician or qualified service personnel. Run Capacitor 30MFD 250VAC Run Capacitor 30MFD 250VAC Wt Wt 2 Items Needed Qty • Phillips Head Screwdriver #2.............................1 • Electrical Tape.................................. As Needed • Wire Nut (14 AWG x 3).....................................1 • 6-15 Plug.....................................................
Model W1844 (For Machines Mfd. Since 5/17) SETUP Unpacking This machine has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Items Needed for Setup SETUP The following items are needed, but not included, to set up your machine. Description Qty • Safety Glasses for Each Person...........................1 • Mounting fasteners............................. As Needed • Tape Measure.........
Model W1844 (For Machines Mfd. Since 5/17) Unpacking This machine has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. C B A D Inventory The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them. Note: If you cannot find an item on this list, carefully check around/inside the machine and packaging materials.
Model W1844 (For Machines Mfd.
Model W1844 (For Machines Mfd. Since 5/17) Machine Placement Weight.Load Physical.Environment Refer to the Machine.Specifications for the weight of your machine. Make sure that the surface upon which the machine is placed will bear the weight of the machine, additional equipment that may be installed on the machine, and the heaviest workpiece that will be used. Additionally, consider the weight of the operator and any dynamic loading that may occur when operating the machine.
Model W1844 (For Machines Mfd. Since 5/17) Assembly Before beginning the assembly process, refer to Items. Needed.for.Setup and gather everything you need. Ensure all parts have been properly cleaned of any heavy-duty rust-preventative applied at the factory (if applicable). Be sure to complete all steps in the assembly procedure prior to performing the Test.Run. Flange Bolt Bag Clamp Foam Strip Wall Bracket For adequate motor cooling, the motor fan intake must not be restricted by a wall or cabinet.
Model W1844 (For Machines Mfd. Since 5/17) Dust Collection System Material Selection You have many choices regarding dust collection ducting, but flexible hose is the most common for this size of machine. However, be aware that there is a fire or explosion hazard if plastic duct material is used for dust collection without being grounded against static electrical charge build-up. Plastic duct generates static electrical buildup that can cause fire or shock. Properly ground it to reduce this risk.
Model W1844 (For Machines Mfd. Since 5/17) Dust Collection If your machine doesn't have a built-in dust port, use Figure 15 to verify which size of ducting to install on your machine. Since each machine produces a different amount of sawdust, the requirements for the minimum amount of CFM to move that sawdust is unique to the machine (for example, a planer produces more sawdust than a table saw). Knowing this required CFM is important to gauging which size of duct to use.
Model W1844 (For Machines Mfd. Since 5/17) Test Run Once assembly is complete, test run the machine to ensure it is properly connected to power and safety components are functioning properly. If you find an unusual problem during the test run, immediately stop the machine, disconnect it from power, and fix the problem BEFORE operating the machine again. The Troubleshooting table in the SERVICE section of this manual can help.
Model W1844 (For Machines Mfd. Since 5/17) OPERATIONS General Operating your Model W1844 is simple and straightforward. Position the machine near the dust collector where it will not interfere with the workpiece being processed, connect the duct, connect the ducting ground, and you are ready to begin. Keep in mind that the dust collector is intended for single machine use and is not designed to draw dust through long ducting runs and multiple ports simultaneously.
Model W1844 (For Machines Mfd. Since 5/17) ACCESSORIES The following dust collector accessories may be available through your local Woodstock International Inc. Dealer. If you do not have a dealer in your area, these products are also available through online dealers. Please call or e-mail Woodstock International Inc. Customer Service to get a current listing of dealers at: 1-800-840-8420 or at sales@woodstockint.com.
Model W1844 (For Machines Mfd. Since 5/17) MAINTENANCE General For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section. Daily Check: • Loose mounting bolts. • Worn switch. • Worn or damaged wires. • Full collection bag. • Any other unsafe condition. Always empty the collection bags on a regular basis. Emptying the collection bags allows the machine to operate at a much higher level of efficiency.
Model W1844 (For Machines Mfd. Since 5/17) Cleaning Canister Filter Always empty the collection bag on a regular basis. Emptying the collection bag allows the machine to operate at a much higher level of efficiency. Always wear the appropriate respirator or dust mask and safety glasses when emptying the collection bag. Small dust particles can escape the bag during emptying, causing them to become airborne and easily inhaled.
Model W1844 (For Machines Mfd. Since 5/17) SERVICE General This section covers the most common service adjustments or procedures that may need to be made during the life of your machine. If you require additional machine service not included in this section, please contact Woodstock International Technical Support at (360) 734-3482 or send e-mail to: tech-support@shopfox.biz. Tightening Impeller Any unusual vibration or noise may be an indication that the impeller has loosened.
Model W1844 (ForTroubleshooting Machines Mfd. Since 5/17) Troubleshooting This section covers the most common problems and corrections with this type of machine. WARNING! DO NOT make any adjustments until power is disconnected and moving parts have come to a complete stop! Motor & Electrical SYMPTOM POSSIBLE SOLUTION on POSSIBLE CAUSE Machine does not 1. Switch disabling key removed. start or a breaker 2. Incorrect power supply voltage or circuit trips immediately size. after startup. 3.
Model W1844 (For Machines Mfd. Since 5/17) Dust Collector Operation SYMPTOM Loud, repetitious noise, or excessive vibration coming from dust collector. POSSIBLE CAUSE POSSIBLE SOLUTION 1. Dust collector or component is loose. 2. Motor mounting or housing connections are loose. 3. Motor fan cover is dented, causing motor fan to hit the cover while spinning. 4. Impeller is loose on motor shaft. 5. Impeller is damaged and unbalanced.
Model W1844 (For Machines Mfd. Since 5/17) Electrical Safety Instructions These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Compare the manufacture date of your machine to the one stated in this manual, and study this section carefully.
Model W1844 (For Machines Mfd. Since 5/17) Wiring Diagram Start Capacitor 200MFD 125VAC 120 Volt Motor Wt Wt Wt Run Capacitor 30MFD 250VAC Safety Paddle Switch Figure 21. 120V junction box. Ground Neutral Hot 120 VAC Ground Figure 20. Start capacitor. 240 Volt Motor 5-15 Plug (Pre-Wired) Start Capacitor 200MFD 125VAC Wt Wt Run Capacitor 30MFD 250VAC Figure 22. 240V junction box.
Model W1844 (For Machines Mfd. Since 5/17) PARTS Main 35 50 12 36 11 10 23 40 26 25 9 32 14 7 31 15 27 8 1-1 21 10-3 10-2 10-1 10-4 10-5 10-6 5 1 10-8 10-10 10-9 30 16 5 17 6 30 51 24 19 34 13 4 17 23 23 24 2 29 10-7 42 6 18 20 33 39 3 41 39 41 28 37 23 22 24 43 44 45 46 49 To reduce risk of circuit overload or machine electrical damage, only operate dust collector with bags/filters installed.
Model W1844 (For Machines Mfd.
Model W1844 (For Machines Mfd.
Fold along dotted lIne place stamp Here Woodstock international inc. p.o.
WARRANTY WARRANTY Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, lack of maintenance, or reimbursement of third party expenses incurred. Woodstock International, Inc.
