Use and Care Manual

ATTACH HORIZONTAL WORK CLAMP

The horizontal work clamp secures the workpiece to the

fence to provide more stability and keeps the workpiece

from creeping toward the saw blade. To install the

horizontal work clamp, see Figure 5 and do the following:

1. Place the clamp shaft (B) in either hole (C) on the

miter table base.

2. Rotate the knob (D) on the clamp clockwise to move

it in or counterclockwise to move it out as needed.

ASSEMBLY

FIGURE 4

FIGURE 5

To ensure safe and accurate operation,

this saw should be mounted to a stable

and level surface such as a workbench. To mount the tool

to a stable surface, refer to Figure 4 and do the following:

1. Locate the four mounting holes in the base of the saw

(A).

2. Secure the tool to the mounting surface using 3/8”

diameter machine bolts, lock washers, and hex nuts

(not included). Make sure the bolts are long enough to

accommodate the saw base, lock washers, hex nuts,

and the thickness of the workbench.

3. Tighten all four bolts securely.

4. Check to make sure that the saw is secure before

operation.

MOUNTING THE SAW TO A

STABLE SURFACE