Dasher 9 ® Portable Scooter User Manual 4/3/2007
Table of Contents INTRODUCTION…………………………………………………………….…………33 FEATURE GUIDE…………………………………………………………….………..33 SAFETY ADVICE………………………………………………………………….…...4 4-5 EMI WARNING………………………………………………………….…………….. 5-6 ADJUSTMENTS………………………………………………….……………………..7 7-8 SCOOTER TILLER CONTROLS………………………………….…………………..1 9 DRIVE/FREEWHEEL OPERATION…………………………………………………10 10 STARTING TO DRIVE YOUR SCOOTER………………………………………….11 11 EXTRA GUIDELINES IN THE CONTROL OF YOUR SCOOTER……………….12 12 TRANSPORT/STORAGE……………………………………………………………..
INTRODUCTION Congratulations on your purchase of the Shoprider® Dasher 9 Portable scooter. The Dasher is the ultimate combination of style, comfort and portability. The Dasher comes with three interchangeable colors, giving you the choice of a different color every day, and includes several innovative and convenient features. The Dasher goes with you wherever you go and can be assembled or disassembled in just seconds with wireless quick-connect components.
SAFETY ADVICE x DO NOT carry passengers. x DO NOT exceed inclines over 6 degrees (10% grade). x DO NOT turn on steep inclines. x DO NOT turn suddenly at high speeds. x DO NOT get on or off the scooter unless the brake is on and the scooter is switched off. x DO NOT switch off the scooter while the scooter is moving. x DO NOT drive the scooter where you can not safely or legally walk. x DO NOT drive the scooter on the road, street or highway.
x For maximum battery life, make sure to fully charge batteries for up to 12 hours prior to first use. EMI WARNING Shoprider® scooters may be susceptible to electromagnetic interference (EMI), which is a kind of interfering electromagnetic energy (EM) emitted from sources such as radio stations, TV stations, amateur radio (HAM) transmitters, two-way radio, and cellular phones.
WARNINGS 1. Do not operate hand-held transceivers (transmitters-receivers), such as citizens band (CB) radios, or turn ON personal communication devices, such as cellular phones, while the scooter is turned ON. 2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them. 3. If unintended movement or brake release occurs, turn the scooter OFF as soon as it is safe. 4.
ADJUSTMENTS Tiller angle adjustment Tiller Angle Adjustment (Fig 2) At the base of the tiller is a round knob. Turn the knob counterclockwise to loosen the tiller and select the desired tiller angle. Turn the knob clockwise to securely lock the tiller into place. Below the knob there is a lock designed to stop the tiller from turning left or right.
Seat Post Seat Height Adjustment (Fig 5) Remove seat as described (fig 4). Remove battery pack (refer to disassembly section). Using two 13mm wrenches, remove locking bolt and nut. Adjust seat post up or down to desired position. The seat height can be adjusted to five different positions by inserting the locking bolt in the desired hole. Replace washer and nut and tighten. Replace battery pack and seat. Serial Number Serial Number (Fig 5) Serial number is located on the seat post.
SCOOTER TILLER CONTROLS (FIG 7) Speed Controls The speed control allows you to set a speed between slow (turtle) and fast (rabbit). Battery Level Indicator Gauge Where the needle sits, shows the amount of charge left in your batteries. The amount of charge will only show at its true level when the scooter is in drive. Always charge the batteries completely before beginning out on any journey.
DRIVE/FREEWHEEL OPERATION (FIG 8) The drive/freewheel lever (yellow ball handle) is located under the seat at the right rear of unit. This lever allows you to disengage the drive mechanism and push the scooter while in freewheel mode. To disengage the drive mechanism (neutral), move the lever forward (the scooter can now be pushed). To re-engage the drive mechanism (drive), move the lever backward (now the unit may be driven).
STARTING TO DRIVE YOUR SCOOTER First Time Use Prior to using your Dasher Portable scooter for the first time, you must charge the batteries fully (refer to Battery Charging Procedures). Charging may take up to 12 hours. Charging the batteries completely prior to first time use will benefit battery efficiency. Failure to do so may cause permanent damage. Getting Started x Select a level area with plenty of space.
EXTRA GUIDELINES IN THE CONTROL OF YOUR SCOOTER Ramps The stability of your scooter is governed by several factors such as the seating position, the angle of the slope and your height and weight. When approaching an incline, do so directly and not at an angle and where ever possible avoid making turns. When going down a ramp or slope keep the speed settings to slow. This will ensure there is a safe controlled descent. When the thumb levers are released the scooter will slowly stop.
TRANSPORT / STORAGE The Dasher Portable scooter is designed to be quickly and easily disassembled into sections for transportation and storage. Follow these simple guidelines for disassembly: Dasher 9 Disassembly (Fig 9 & 10) 1) Remove the front basket: Lift basket up and off. 4 2) Fold the seat down and remove: Pull yellow 2 swivel seat lever up and lift seat up and off. 3) Remove battery pack: Lift battery pack up 1 and off using handle (Note: battery pack is secured by Velcro).
BATTERIES AND BATTERY CHARGING The Shoprider® Dasher Portable scooter is supplied with maintenance-free, sealed lead acid batteries. For easy handling, the batteries are contained within a battery pack. Battery life and performance may be affected by temperature, terrain, condition of battery, the weight of the user, and care of batteries. The battery needle gauge is only a guide and is most effective when the scooter is moving, only then is the true discharge level displayed.
MAINTENANCE Tires Since your tires are flat free tires, there is no need to ever worry about tire air pressure. General Maintenance and Lubrication x Inspection for loose wheel bolts, seat and arm tightening bolts, and other nuts and bolts is recommended on a regular basis. x Most lubricated components on the Dasher Portable scooter are designed to be maintenance free and are sealed. Therefore lubrication is not required for these components.
TECHNICAL SPECIFICATIONS UNIT SPECIFICATIONS DASHER 9 1 Overall Dimensions: L x W x H in 38.8” x 22” x 36” Front 9” x 1 Flat Free Rear 9” x 2 Flat Free lb MAX. 300 lb 35 lb 110 lb 35 _V_Ah x Pcs 12V 21Ah x 2 Charger Output Power of Motor Maximum Speed2 (on the level road) Amp hp mph 2 or 3 (Off Board) 0.75 3.
QUARTERLY INSPECTION For your own safety, quarterly inspection and service of the product by an authorized dealer is recommended. There may be a nominal dealer inspection fee for this service not covered by warranty. Maintenance records (below) should be kept at all times. The manufacturer / distributor / vendor will be indemnified from any product liability claim if the above maintenance / service requirement not met.
Notes: 4/3/2007 18
Notes: 4/3/2007 19
WARRANTY Please refer to warranty information included with unit. DISCLAIMER Congratulations on your purchase of the Shoprider® Dasher Portable scooter. It is not intended to be used by individuals with physical limitations that could prevent the user from operating this unit safely. Shoprider® disclaims all responsibility for any personal injury or property damage, which may occur as a result of improper or unsafe use of its products.
