Operation Manual

Batteries & Battery Chargers
Charging
The battery pack can be charged as an independent unit. It does not have to be
connected to the scooter (See Diagram below)
If your scooter has the round battery charge level indicator it will be in the RED
section when the battery is very low. If your scooter has the 8 light LED charge
level indicator it will require urgent recharging when the last LED starts flashing
QT3 / QT4
Place the MALE socket of the battery charger into the female socket on the
battery pack taking care to ensure that the pins line up correctly.
Plug your charger into the wall and turn the power on. The charger light will
glow RED indicating the batteries are NOT fully charged. When the batteries
have reached their capacity the charger light will glow GREEN.
If you turn your Q.T. Scooter on while the battery charger is still operating a
beeping alarm will sound to advise you to turn off and disengage the charger.