Operation Manual

Care & Maintenance (continued)
Servicing
Shoprider® recommends that your scooter be service as a minimum every 12
months for average users and every 6 months for heavy users. This will ensure
that your Shoprider® will continue to deliver the outstanding reliability they are
known for. Please contact the selling Shoprider® dealer to arrange.
Trouble Shooting Information
Circuit Breaker
Your Shoprider® scooter is fitted with the latest in electronic controls that are
programmed to protect the electrical system from abnormal overloads. Fitted for
extra protection is a circuit breaker, should there be a situation that your scooter
stops please check that the circuit breaker has not popped out or tripped. The
circuit breaker can be found on the battery box on all model in this manual
Please note: Overloading your scooter can be a common reason for your circuit
breaker switching. Any overloading must be removed to ensure continued
reliable operation.
Check List
If your scooter fails to operate, please check the following:
Is the key in the correct slot and Turned to the ON position?
Does the battery level indicator gauge show the Battery level, is it fully
charged?
Is the Freewheeling device in the drive position (can the scooter be
pushed)? If it can then the Freewheeling device may be disengaged.
Re-engage the Freewheeling device.
Reset the circuit breaker.
PLEASE NOTE: If the free wheel device has been operated with the scooter
switched on, then the scooter will not operate until the ignition key has been
switched off and then on again in order to reset the circuits.
Please consult your selling Shoprider® provider if your scooter does not run
after checking these points.