Wheelchair User Manual

3/13/2008

code and beep steadily if turned on. Refer to Table 1 for more

details.

Both left and right sides must be in drive mode for power chair to

operate. Otherwise the Powerchair will flash fault code of 9 lights

and will not operate.

Drive/Freewheel Mechanism

The drive/freewheel levers are found toward the rear of the

Powerchair, both on top left and one on right. These levers will

allow you to disengage the drive mechanism and push the

Powerchair while in freewheel mode. (FIG. 4)

Figure 4

Freewheel Levers

Drive Powerchair

set in motion