User's Manual
41
Viewing Phone Information
To view information about your phone, such as IP address, subnet mask,
version, and MAC address, follow these steps:
NOTE This should only be done at the direction of your system administrator.
Step 1 With the phone on hook, press the Mute button .
The LED should not light and you shouldn't hear any tones;
if this isn't the case, lift and replace the handset.
Step 2 Dial I-N-F-O on the keypad and then press .
The following information is displayed and can be scrolled
through by pressing :
• IP Address (DHCP)
• Subnet Mask
• Gateway
• Link Speed (reflects speed of both ports)
• FTP Server
• Media Gateway Controller (MGC) Server
• SNTP Server (IP address)
• 802.1Q VLAN ID setting
• DNS Address (displayed only on 230g)
• VPN Gateway (displayed only on 230g)
• VPN Port (displayed only on 230g)
• VPN (displayed only on 230g)
• VPN User name Prompt (displayed only on 230g)
• VPN password prompt (displayed only on 230g)
• VPN FTP address (displayed only on 230g)
• Tunnel IP address (displayed only on 230g)
• Tunnel Gateway (displayed only on 230g)
• Application File Name
• Boot File Name
• MAC Config File Name
• Config File Date
• Application Version build date
• Boot Version build date
• Country
• Language setting
• Model Number
• MAC Address
• Serial Number
• Hardware Version