User manual
Table Of Contents
- Congratulations on purchasing your Shotsaver SG255X
- First, charge the battery
- Charging your battery - step by step
- Battery low condition
- Getting to know the buttons and modes
- Push button functions
- GOLF MODE FUNCTIONS
- How to enter GOLF mode
- How to set UNITS
- How to set the TEE
- How to use the GOLF mode DEMO option
- Here is the information displayed in the FCB (Front, Centre, Back) screen:
- GOLF mode
- Using the electronic scoring system
- Completing your round, viewing and saving your scores
- How to enter and use GOLF DATA mode
- The golf data file number system
- How to enter and set up RUN mode
- Using RUN mode
- User settings
- RUN mode sub-views
- Setting RUN mode sub-views
- Data view over 2 lines
- Data view over 3 lines
- How to view your RUN data
- How to enter and use RUN DATA mode
- How to use the VIEW/ DELETE/ DEL ALL sub-menus
- The RUN DATA numbering system
- Run Mode user settings and AUTO LAP setting
- How to set AUTO LAP and use the manual lap time function
- Setting the lap distance
- Using the manual lap time function
- How to set UNITS - metric or imperial
- How to set USER - gender, age, weight and height
- How to set VIEW
- Inserting a battery
- How to set up and pair your SG255X with the Heart Rate Monitor (HRM)
- Useful HRM tips
- How to set up heart rate zones
- SG250 Auto power save
- How to enter the TIME mode
- TIME mode settings
- How to set the time
- Setting time with the GPS option
- Setting time with the MANUAL option
- Backlight and NIGHT settings
- How to set and use the backlight
- How to set and use NIGHT mode
- How to adjust the LCD CONTRAST in TIME mode
- CHIME Setting in TIME mode
- How to set up and use the ALARM mode
- How to preview alarms set and to switch alarms on and off
- SG250 Troubleshooting Guide
- Key Function Matrix
- Snooper PC Companion software
- How to download golf data to your SG255X
- How to upload and synchronise RUN data with your PC
- How to reset your SG255X
- Registering your SG255X
- Caring for your SG255X
- Service under warranty
- Information on GPS
- Manually switching GPS on and off
- How to turn off the GPS connection
- GPS signals
10 • UK
Data view over 3 lines
If you want to have 3 lines of data displayed, the chronograph information will always be displayed on the top line. You can then
choose what information you want displayed on lines 2 and 3.
Launch RUN mode in the normal way, and press S1 to start your training session.
Press S3, briefly, to change the data type displayed on line 2. Keep pressing S3 to choose between SPEED, HRM (if connected),
CALORIE, TIME (clock), CHRONO, DISTANCE or PACE. Each time you press S3, the data type displayed will appear briefly to confirm
your selection.
To change the data type displayed on line 3, press and hold S3 until the data type changes. Keep pressing and holding S3 to
choose between SPEED, HRM (if connected), CALORIE, TIME (clock), CHRONO, DISTANCE or PACE
You can change the data displayed on either line by pressing S3, briefly, or pressing and holding S3 at any time during your
training session.
How to view your RUN data
When you have finished a training session press S5. The chronograph will stop, your SG250 will stop recording data and STOP will
flash on the screen. To immediately view the data collected during this session, press S3 before saving. The following information will
be displayed:
Stop/ Calorie/ Distance
Calorie/ Ave Speed/ Max Speed
Calorie/ Ave Pace/ Max Pace
To save this session, press and hold S5.
User Tip: When the chronograph is stopped or reset, if there is no key operation for 15 minutes, the GPS will automatically turn
off and your SG250 will return to TIME mode.
How to enter and use RUN DATA mode
Press S7 to scroll through the main modes to RUN DATA mode. Your SG250 will momentarily display RUN DATA, then the latest
data file saved. If there is no data available, it will display NO DATA.
If you want to view the data from other saved training sessions, press S1 or S5 to scroll through the data files previously saved.
Note: A maximum of 50 files, with 100 laps in each file, can be saved.
Next, press S3 to enter the selected file. Your SG250 will display the start time, end time and distance.
Press S1 or S3 to scroll forwards through the data saved for each session, or press S5 to scroll backwards. You will be able to view
the following information:
» Start, end time & distance.
» Chrono, distance & calorie
» Chrono, ave pace & max pace
» Chrono, ave speed & max speed
» Chrono, ave HRM & max HRM
» Lap 1 time & distance
» Lap 2 time & distance
» … last lap time/ distance
» VIEW/ DELETE/ DEL ALL sub-menus
» Press S7 to exit.