Installation Notes

Controller connection adapter as shown
1
Specif ication
Package contents and specification Installation notes
INSTRUCTION MANUAL
VOICE COMMAND CONVERTER
XXXXXXXX
INPUT: 100-240V ~ 50/60Hz, 0.3A
OUTPUT: 5V 1000mA
OPERATION: Indoor/Outdoor
OPERATING TEMPERATURE: -15° F TO 90° F (-26° C TO 32° C)
WARRANTY: One Year Limited
www.ishowtree.com
Scan & See Me!
Installation notes
Device usage Audio input
Connect the power adapter to the power supply
2
3
1
3
5 6
2
Connect USB charger
The other port to link the device
Take off SL100 stand as below show,
(picture 1) 1 2 3 parts are the screw hole location
1
STA mode (Connect your device to your phone)
1. Plug in and turn on the device, multi-color indicator light will on
and get into STA mode, turn on your phone Wi-Fi
2. Connect your device to your phone via APP, turn on APP, register
an account, after that, login the account, and operat as below shown
3.When the multi-color indicator light becomes blue for 1 second,
and then turns off, it means STA mode connects successful and
get into connection mode
Control though Google, Alexa & google voice command, when the
device get the control command, the green indicator light will be on,
the above 2 control mode can also control the bluetooth lights color
chang
4
Put the SL100 onto the magnetic stand
折页说明书 单黑印刷 size:125*165MM
封面
封底
Device usage
4
A
D
G
F
E
B
C
SL 100
SL 100 Stand
Set screws plastic parts
USB
Adapter
Audio output line out
audio input to interface
A
B
C
D
E
F
G
1
1
3
1
1
1
1
PART DESCRIPTION QUANTITY
1
2
3
insert the tool to take off the up cover
Take off the up cover,and fix onto the wall
with the screw plastic parts with the arrow
up direction (Punch hole position on the
wall and use screw plastic parts to fix stand.)
Fix stand onto the wall, and put the up cover.
Picture 1
WiFi
Home Internet
UltimateString_xxxx
Neighbour Network
WiFi
Home Internet
UltimateString_xxxx
Neighbour Network
Smart
Conlig
SSID:WIFIXXXX
BSSID:BO:XXXXXXX
Password:
Device count:
Broadcast Multicast CONFIRM
XXXXXX
1
2
Connect mode
2
Audio input operational approach
1.Put the audio input port into AUX as below shown
Accident when the product in normal use, the orange indicator light of the
device will be on, check the internet, when the internet get well, the device
will automatic get network configuration, if success, the blue indicator will
be on for 1 second, then go into the connection mode.
3
Off-line mode
4
Press the Reset button for 5 seconds and recover to STA mode.
2.Connect the audio line between the SL 100 audio
input interface and your phone(or other music player),
then the lights will flash follow the music beat.
Audio interface
Audio output: support connecting
earphones and other audio play device
AUX
Input
Input
AUX
Smart
Conlig
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide r
easonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the i
nterference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.

Summary of content (1 pages)