Instructions / Assembly

ManualsBrandsShow Home ManualsArtificial Christmas Trees7.5 ft. Pre-Lit LED Hapeville Wi-Fi Artificial Christmas Tree with 196 C6 Lights

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical products, basic precautions should always be

followed including the following:

READ AND FOLLOW ALL SAFETY

INSTRUCTIONS.

b) This product is for indoor use only. The electrical rating 120V 60Hz 0.5A

Max.

c) Do not use seasonal products outdoors unless marked suitable for

indoor and outdoor use. When products are used in outdoor applications,

connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If

one is not provided, contact a qualified electrician for proper installation.

d) This seasonal use product is not intended for permanent installation or

use.

e) Do not mount or place near gas or electric heaters, fireplace, candles or

other similar sources of heat.

f) Do not secure the wiring of the product with staples or nails, or place on

sharp hooks or nails.

g) Do not let lamps rest on the supply cord or on any wire.

h) Unplug the product when leaving the house, when retiring for the night,

or if left unattended.

i) This is an electric product – not a toy! To avoid risk of fire, burns personal

injury and electric shock it should not be played with or placed where small

children can reach it.

j) Do not use this product for other than its intended use.

k) Do not hang ornaments or other objects from cord, wire, or light string.

l) Do not close doors or windows on the product or extension cords as this

may damage the wire insulation.

m) Do not cover the product with cloth, paper or any material not part of the

product when in use.

n) Read and follow all instructions that are on the product or provided with

the product.

SAVE THESE INSTRUCTIONS.

Package Contents

A. Tree top

Qty: 1

B. Tree center

Qty: 1

C. Tree bottom

Qty: 1

D. Stand with an eye

bolt

Qty: 1

E. Power cord

Qty: 1

HAPEVILLE TREE WIFI VOICE C6 196 LED

SKU# 1004363930

Assembly

Assembling the tree stand

Step 1. Choose a location near a wall outlet.

Step 2. Open the stand to a 90 degree angle until the hole lines up with the

hole on the tube.

Step 3. Screw an eye bolt into the hole.

CAUTION! – ALWAYS UNPLUG YOUR TREE

FROM ITS POWER SOURCE BEFORE ASSEMBLING OR

DISASSEMBLING.

Assembling the tree

Please remove protective covers from the base of the pole for each tree

section before assembling.

Step 1. Insert tree bottom (C) into the tree stand and tighten the screw.

(See Fig. 1)

Step 2. Insert middle section (B) into the tree bottom (C). (See Fig. 2)

Step 3. Insert tree top (A) into the middle section (B). (See Fig. 3)

Step 4. Insert the provided power cord into the connector on the tree

bottom (C) in right direction porperly and tightly (always match the

protuberance of the end connector of power cord to the concave

of the connector found on the tree bottom (C) according to the

magnified drawing on fig. 4.).

Step 5. Allow branches to fall into place or gently pull branches up and out.

When adjusting branches be sure that all wires are free of branch

hinges. (See Fig. 5)

Step 6. Shape the branches. Starting with tips closest to the pole, shape

one tip to the right, one to the left and one at the center of the main

stem. Repeat pattern for each branch. (See Fig. 6)

Step 7. Plug the power cord into a proper outlet. This tree comes with a

control box and a foot pedal switch for easy illumination and

changing functions. This tree is Color Changing, the 15 lighting

options available are:

1. Steady On

2. Twinkle

3. Sparkle

4. Instead

5. Fade

6. Rolling

Pre-Assembly

Summary of content (4 pages)

PAGE 1
HAPEVILLE TREE WIFI VOICE C6 196 LED SKU# 1004363930 Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. a) b) This product is for indoor use only. The electrical rating 120V 60Hz 0.5A Max. c) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
PAGE 2
7. Waves 8. Fireworks 9. Rainbow 10. Color Band 11. Up and Down 12. Snow 13. Glow 14. Carnival 15. Alternate These functions can be changed by using control box or foot pedal switch. Please see Instructions of control box as below. b. Function status indicator (White Leds). The number corresponding to the LED is the serial number of the mode. c. Timer status indicator (Green Led) ● When the green led is on, it indicates that the timer is on.
PAGE 3
How to control your Show Tree with APP 6. Now you have entered the operation interface of Show Tree. 1. Download the “Holiday Showhome” App from App Store (IOS) or Google Play (Android). 2. Open the “Holiday Showhome” App and sign in. Browse effects by swiping left or right Notes: You can also click the skip button to skip the login screen and use the visitor mode, but you will not be able to use voice control at this time. 3. Click the Add Device button and select the Wi-Fi.
PAGE 4
CAUTION: The product consists of non-replaceable LED lamps. To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string. Care and Cleaning Step 1. Remove all ornaments and decorations. Step 2. Unplug the power cord from the wall outlet. And remove your power cord from tree bottom (C) and save them. Step 3. Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole. Step 4.