User`s manual

Connecting Power
7
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual
Sh wline
Connecting SL STRIP 400 RGBW LED Luminaires to AC Power
The unit is supplied with an AC input cable without an input connector. Input connector is a user-supplied accessory
to fit your application.
Table 2 describes how to connect power to your SL STRI P 400 RGBW LED Luminaire. Field wiring of the SL
STRIP wires/conductors is supplied from the unit. 400 RGBW LED Luminaire is straight forward. A total of 3
The following wiring scheme is used:
Table 2: SL STRIP 400 RGBW LED Luminaire (IP20 Rated Models) AC Input Connections
Figure 3: SL STRIP 400 RGBW LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced with an approved
cable through an Authorized Showline Dealer or Service Center.
Wire Color Purpose
Brown Main / Line (100 to 240VAC)
Blue Neutral
Green/Yellow Ground (Earth)
Bottom of Unit
AC Input
AC Output