User's Guide

•
Follow Steps 2 and 3 below to open the MojoBox.
•
Once you have the MojoBox open, refer to Step 1 above
to install the batteries.
Step 2: Add the MojoBox to Your
Account
1. Open the ShowMojo or MojoLock app.
2. Select menu in the top right of the screen.
3. Select Add Lock.
4. Press any number on the MojoBox to turn on the Bluetooth.
5. Select Add Lock on the ShowMojo app.
6. Find the MojoBox by serial number on the "nearby locks" list
and select "+" to add the MojoBox to your account.
7. Select the MojoBox by serial number or assigned listing from
the Digital Access List.
8. Manual codes can now be generated from the mobile app, or
the mobile app can open the MojoBox via Bluetooth.
Step 3: Operation
Manual code entry: Enter the access code and press OK, upon
acceptance of the code, the MojoBox will beep and flash the green
LEDs. Move the slider to the right to open the key compartment. The
MojoBox will automatically re-lock in six seconds.
/ 4 7