MANUAL ENGLISH Club Par 18-1 RGB V1 Ordercode: 42652 Highlite International B.V.
Club Par 18-1 RGB Table of contents Warning ...............................................................................................................................................................................2 Safety Instructions .........................................................................................................................................................2 Operating Determinations ...........................................................................................
Club Par 18-1 RGB Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Club Par 18-1 RGB Before the initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device. To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes contained in this manual. Please consider that damages caused by manual modifications to the device are not subject to warranty. This device contains no user-serviceable parts.
Club Par 18-1 RGB • • • • • The user is responsible for correct positioning and operating of the Club Par 18-1 RGB. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth. During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective.
Club Par 18-1 RGB The Club Par 18-1 RGB can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place.
Club Par 18-1 RGB Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Club Par 18-1 RGB Description of the device Features The Club Par 18-1 RGB is an compact light effect with high output and great effects.
Club Par 18-1 RGB Backside Fig. 02 04) 05) 06) 07) 08) 09) Built-in Microphone Audio Sensitivity 4-digit LED display + menu buttons 3-pin DMX signal connector IN 3-pin DMX signal connector IEC power connector 100-240V + Fuse F0,5AL/250V Installation Remove all packing materials from the Club Par 18-1 RGB. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.
Club Par 18-1 RGB Control Modes There are 5 modes: • • • • • Built-in programs Manual Mode Static Color Sound-controlled DMX-512 (3CH or 8CH) One Club Par (Built-in programs, Static Color Mode and Manual Mode) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Plug the end of the electric mains power cord into a proper electric power supply socket. 03) When the Club Par is not connected with a DMX cable, it functions as a stand-alone device.
Club Par 18-1 RGB Multiple Club Pars DMX Set Up Fig. 03 Note : Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Club Par 18-1 RGB The Club Par 18-1 RGB can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel A) B) C) D) E) LED display MODE button SETUP button UP button DOWN button Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address, next time.
Club Par 18-1 RGB Menu Overview Ordercode: 42652 12
Club Par 18-1 RGB Main Menu Options DMX-512 Mode Channel Mode Program Speed Built-in programs Sound-controlled Mode Static Color Mode Strobe Red Green Blue Mode Led On/Off Temperature Version Reset 1. DMX-512 Mode With this menu, you can set the DMX address and select the desired channel mode. 01) Press the MODE button until the display shows . 02) Press the SETUP button to open the submenu, the display will show . 03) Press the UP/DOWN buttons to choose the desired DMX address.
Club Par 18-1 RGB 3. Speed 01) Press the MODE button until the display shows . 02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the run speed of the built-in programs. The adjustment range is between fast to slow). , 00-99 (from 4. Built-in programs With this menu, you can set the built-in programs. 01) Press the MODE button until the display shows .
Club Par 18-1 RGB 11. Node With this menu, you can set the dimmer curve of your Club Par. 01) Press the MODE button until the display shows . 02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to toggle between one of the 5 dimmer curves from fast to slow: 03) is linear, . is from (1 sec- 4 sec. dimming curve). modes always override Channel 8 12. LED Display With this menu you can set the LED Display On or Off. 01) Press the MODE button until the display shows .
Club Par 18-1 RGB DMX Channels 3 channels Channel 1 – Red 0-255 Gradual adjustment Red, from 0-100% Channel 2 – Green 0-255 Gradual adjustment Green, from 0-100% Channel 3 – Blue 0-255 Gradual adjustment Blue, from 0-100% 8 channels Channel 1 – Dimmer intensity 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Red Dimmer must be open 0-255 Gradual adjustment Red, from 0-100% Channel 3 – Green Dimmer must be open 0-255 Gradual adjustment Green, from 0-100% Channel 4 – Blue Dimmer must be op
Club Par 18-1 RGB Maintenance The operator has to make sure that safety-related and machine-technical installations are to be inspected by an expert after every year in the course of an acceptance test. The operator has to make sure that safety-related and machine-technical installations are to be inspected by a skilled person once a year.
Club Par 18-1 RGB No Response to DMX Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 01) Check the DMX setting. Make sure that DMX addresses are correct. 02) Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try your DMX control again. 03) Determine whether the controller or light effect is at fault. Does the controller operate properly with other DMX products? If not, take the controller in for repair.
Club Par 18-1 RGB Product Specifications Model: Input Voltage: Power consumption: Drive Current: Refresh rate DMX linking: Protection rate: Fuse: Dimensions: Weight: Showtec Club Par 18-1 RGB 100-240 VAC, 60/50Hz 20W (full output) 270mA 1200Hz 30pcs IP-20 F0,5AL/250V 290 x 270 x 73 mm (LxWxH) 1,48 kg Operating and Programming: Signal pin OUT: DMX Mode: Signal input: Signal output: Pin 1 (earth), pin 2 (-), pin 3 (+) 3 or 8 channels 3-pin DMX IN 3-pin DMX OUT Electro-mechanical effects: LED Quantity: Li
Club Par 18-1 RGB Dimensions Ordercode: 42652 20
Club Par 18-1 RGB Notes Ordercode: 42652 21
Club Par 18-1 RGB Ordercode: 42652 22
©2015 Showtec
