StrobeCon-4 ORDERCODE 40233
Congratulations! You have bought a great, innovative product from Showtec. The Showtec StrobeCon-4 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec StrobeCon-4™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. Rigging…………………………………………………………………………………………………………. 2 2 3 4 Description..…..............................................................................……….………………………………… Features and Overview ………………………………...….……………….………….………………….….
WARNING CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • Make sure that the core diameter of extension cords and power cords is sufficient for the required power consumption of the device. If device is dropped or struck, disconnect main power supply immediately. Have a qualified engineer inspect for safety before operating. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device.
Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! Procedure: • • • • • If a strobe is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount a strobe, with the mounting-bracket, to the trussing system. A strobe must never be fixed swinging freely in the room.
Description of the device Features The Showtec StrobeCon-4 is a Strobe Controller. • 4 channel strobe controller • 4 analog outputs and 1 DMX 512 output • 17 strobe patterns+ 1 auto program • Audio- or Speedcontrol • Speedcontrol 1-99 / min. • Flash rate adjustable (1 flash/3 sec. – 7 flashes/ sec.) • Dimmer 100% • Full-on • Use the StrobeCon- 4 to work with Showtec Black Widow Strobe (40213) - no dimming Overview Fig. 1 Backside Fig.
) DOWN button Press to decrease the display value 9) UP button Press to increase the display value. 10) FULL ON button Press this button to bring overall channels to full intensity. Release will deactivate this mode. 11) STAND BY button Tap this button to kill all output except that the FULL ON button is pressed. A second tap of this button will leave this mode. 12) Mode Select switch Move the switch to the left, it may control the Q-strobe 2; Move the switch to the right, it may control the Titan-Strobe.
Maintenance The Showtec StrobeCon-4 requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe glass clean with glass cleaner and a soft cloth. Do not use alcohol or solvents. The glass will require regular cleaning, as smoke-fluid tends to build up residues, reducing the light-output quickly. Keep connections clean.
Product Specification Model: Showtec StrobeCon-4 Voltage: 240V-50Hz (CE) 4 DMX channel /4 channel pulse signal 3-pin XLR female socket for 4 channel DMX output 20 built-in chase programs, chase rate under control AUDIO/PROGRAM/SPEED/DIMMER/FULL ON/STAND BY mode Audio line in 100mV-1Vpp 4 digits Segment Display shows current activity and the function state. Power failure memory Power input: AC 9V, 500 mA min.
2006 Showtec.