User manual

13
4) When you select , you can press Setup to switch between the built-in
programs Menu.
5) You can choose 2 different sub menus.
Program Running Speed from 01-99 and FL
Flash Frequency from 00-99
Use the Setup button to scroll through the menu.
2. Auto Run Program
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Auto Mode of the Compact Par.
3) Press Setup to enter the AUTO Menu. You can choose 3 different sub menus.
Speed from 01-99 and FL
Flash Frequency from 00-99
Fade from 00-99
Use the Setup button to scroll through the menu.
3. DMX Mode
With this menu you can set the DMX address.
1) Press the MODE button, until the display shows .
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from .
3) You can also press the SETUP button to set 3 different DMX Modes.
Use the Up / Down buttons to select the required Mode.
3 Channels
4 Channels
8 Channels
4. Slave Mode
When the display shows: , the device is a slave device. It will now react the same as its master.
5. Sound control Mode
1) Press the MODE button on the device, until the display shows . Turn on the music and the
Compact Par will react to the beat of the music.
You can adjust the sensitivity from low sensitive to high sensitive.