User manual

5
Description of the device
Features
• 10 Channel switchboard with flash buttons
• 10A per Channel
• IEC Socket on the backside
Overview
Fig. 1
Backside
Fig. 2
1) Fuse 10 A
2) Power switch ON/OFF
3) 10x Flash buttons
4) 10x IEC Socket
5) Ground
6) Power cable
Installation
Remove all packing materials from the DJ Switch. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.