Product guide

8
Operation
For more information about working with the LED Commander, you can also view:
Link: http://www.youtube.com/showteclight
Channel Assignment
1) Press and hold the Patch/Down button (21) for 3 seconds. The Patch LED will light up red.
2) Choose channel range with the SPEED fader (23). Example: 1, 17, 33, 49, etc.
Range 17: Start at 17 and stop at 32.
3) Choose a DMX channel with the FADE fader (24).
4) Press the fixture button (1) you desire. The Fixture LED will light up blue. You can choose 8 different
fixtures.
5) Now press and release the flash button (13) from the fader you want to patch the DMX channel to.
Example:
This figure shows that DMX channel 49 is patched to the RED fader (5) of fixture 1.
6) Press Patch button for 3 seconds to exit Patch mode.
Factory Reset
1) First turn off the device.
2) Now press and hold the Record (15) button + Tap Sync (16) together.
3) Now switch on the device.
4) The display will show:
5) After 2 seconds the Fixture LEDs 4 and 8 will flash once, indicating the LED Commander is back to
factory default settings.
After the factory reset, the fixture is auto patched:
Fixture 1 Fixture 2 Fixture 3 • • Fixture 8
Red CH1 Red CH9 Red CH17 • • Red CH57
Green CH2 Green CH10 Green CH18 • • Green CH58
Blue CH3 Blue CH11 Blue CH19 • • Blue CH59
Color CH4 Color CH12 Color CH20 • • Color CH60
Strobe CH5 Strobe CH13 Strobe CH21 • • Strobe CH61
Sound CH6 Sound CH14 Sound CH22 • • Sound CH62
Dimmer CH7 Dimmer CH15 Dimmer CH23 • • Dimmer CH63
Master CH8 Master CH16 Master CH24 • • Master CH64