Octostrip ORDERCODE 42220
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Octostrip brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Octostrip™ Product Guide Warning..…...................................................................................…………………………………………. 2 Safety-instructions………………………………………………………………………………………….…. 2 Operating Determinations…………………………………………………………………………………….3 Description..…..............................................................................……….………………………………… 4 Features…….……………………………………………………………………………………….……...…. 4 Overview……………………………………………………………………………………………………….. 4 Installation.....
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
Make sure that the device is not exposed to extreme heat, moisture or dust. Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged. Check the device and the powercord from time to time. If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating. If the device has been exposed to drastic temperature fluctuation (e.g.
Description of the device Features The LED Octostrip is a LED system from Showtec. • 8x Octostrip and 1x controller • 4x4 meter DC / Signal cable and 4x8 meter DC / Signal cable • 8x Installation Bracket • Adjustable Fade time / Chase time • 3 Modes: Stand-alone, DMX-controlled or Sound-controlled • Maximum cable length between the controller and the Octostrip: 50 meters! NOTE: Knowledge of DMX is required to fully utilize this unit. Overview Fig.
Installation Remove all packing materials from the LED Octostrip. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
2) F / S Adjust Chase Fade Time from 0-100%. Adjust Chase Speed from 1-500/min. Stand-alone Operation Refer to the four buttons on the front panel of the controller: Mode F/S Up Down Press the MODE button to view the Chase menu: Select Chases 1-9 using the UP and DOWN buttons. Chases 1-8 run according to the Fade and Speed values. Chase 9 is sound-active. Press the F/S button to set the Fade and Speed values: Adjust Chase Fade Time from 0-100%. Adjust Chase Speed from 1-500 steps per minute.
DMX Operation Press the MODE button to view the DMX address setting rnenu: Select the DMX starting address for the controller using the UP and DOWN buttons. The DMX Channel functions are: Channel 1: Channel 2: Channel 3: Channel 4: Channel 5: Channel 6: Rainbow Red (0-255) Green (0-255) Blue (0-255) Strobe (1-20HZ) Sound-active/ Audio sensitivity There are 8 modes of self-running programs (0-220) and 1 sound-active program (241-255) in Channel 6.
DMX Modes Press the MODE button to view the DMX mode selection menu. Use the UP and DOWN buttons to select the DMX mode.
9
10
Maintenance The LED Octostrip requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specification Model: Showtec Controller for LED Octostrip Voltage: AC 230V-50Hz (CE) Power: 200W 4 different DMX Modes (48 Channels, 24 channels, 12 channels, 6 channels) 8 built-in chases Adjustable Fade time / Chase time Sound active Mode Powerconnection: Powercon (IN and Out) Data connection: 5 Pole XLR connector Dimensions: 200 x 360 x 95 mm (LxWxH) Weight: 5,15 kg Model: Showtec LED Octostrip Power: 14W x 8 Data Connection: 5 Pole XLR connector 180 LEDs (60 Red, 60 Green, 60 Blue) M10 sliding p
Other Showtec Products: LED Tube (41000) LED Cove Tube (41005) LED Wallpainter (41200) LED Aqua Painter (41220) Octopod 90 (30987) 13
2007 Showtec.