Magic Icecycle ORDERCODE 43105 Highlite International B.V.
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Magic Icecycle brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Magic Icecycle™ Product Guide Warning ........................................................................................................................................................................... 3 Safety Instructions ..................................................................................................................................................... 3 Operating Determinations .......................................................................................
Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact. Never look directly into the light source. Do not open the device and do not modify the device. Never leave any cables lying around. Do not connect this device to a dimmerpack.
Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The minimum distance between light-output and the illuminated surface must be more than 0.5 meter. • The maximum ambient temperature ta = 45°C must never be exceeded. • The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable Pin L BROWN RED YELLOW/COPPER FASE N BLUE BLACK SILVER NUL YELLOW/GREEN GREEN GREEN EARTH Make sure that the device is always connected properly to the earth! Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Description of the device Features The Showtec Magic Icecycle is a light effect with high output and great effects. • Play traditional snowfall effects as well as several other built in effects • Dipswitch selectable programs • Indoor and outdoor use • Plug & play set with 18 tubes • Long-life LEDs around 20.000 hr. • Input voltage: AC 230V • Power consumption: 22W • Tube length: 825mm • Tube diameter: 15mm • Max. distance between tubes: 340mm • Max.
Installation Remove all packing materials from the Magic Icecycle. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
Coupling Magic Icecycles If you want to run more than one Magic Icecycle synchronously, you have to obtain an optional buffer (43105-01) for each additional Magic Icecycle. 1) Connect the controller and the powersupply to the Magic Icecycle as you would do with a single standalone Magic Icecycle. 2) Connect the (optional) buffer to the buffer connector (7) of the controller for the first Magic Icecycle. 3) Each buffer needs to be connected to an additional power supply.
4) Connect the other side of the (optional) buffer to the second Magic Icecycle and so on. You can connect up to 50 Magic Icecycles in this way. 5) Make sure that each connection is set up properly and tighten the according nuts. 6) Check all connections, plug the power cable in a proper electrical power supply socket. Controller 1) Unscrew the plastic cover (10) and remove it. 2) Remove the rubber seal (11). 3) Now you are able to set up the desired sound mode.
Pattern 3: Whole tube flashes irregularly. Pattern 4:Waves. Pattern 5: Running forward en backwards. Pattern 6: Random square. Pattern 7: Musical sound waves. Pattern 8: Icecycle effect. No sound control. 4) Setting more than one DIP switch allows you to run the according patterns in sequence. 5) Replace the rubber seal (10) and reinstall the plastic cover (9). Maintenance The Showtec Magic Icecycle requires almost no maintenance. However, you should keep the unit clean.
Troubleshooting No Light This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. If the light effect does not operate properly, refer servicing to a technician. Response: Suspect three potential problem areas: the power supply, the controller and the LEDs. 1. The power supply. Check that the unit is plugged into an appropriate power supply. 2.