Product guide

11
Pattern 3: Whole tube flashes irregularly.
Pattern 4:Waves.
Pattern 5: Running forward en backwards.
Pattern 6: Random square.
Pattern 7: Musical sound waves.
Pattern 8: Icecycle effect. No sound control.
4) Setting more than one DIP switch allows you to run the according patterns in sequence.
5) Replace the rubber seal (10) and reinstall the plastic cover (9).
Maintenance
The Showtec Magic Icecycle requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. The housing will require monthly
cleaning, as smoke-fluid tends to build up residues, reducing the light-output very quickly.
Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the
connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or
supplying electric power.
The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by an expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1. All screws used for installing the device or parts of the device have to be tightly connected and must
not be corroded.
2. There may not be any deformations on housings, fixations and installation spots.
3. The electric power supply cables must not show any damages or material fatigue.