LED Par 64 Short Q4-18 ORDERCODE 42468 Highlite International B.V.
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Par 64 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Par 64™ Product Guide Warning.................................................................................…...……………..…………………………….…………. Safety-instructions………………………………………………………………………………………………………. Operating Determinations.…………………………………………………………………………………………… Rigging.…………………………………………………………………………………………………………………… Return Procedure……………………………………………………………………................................................ Claims……………………………………………………………………........................................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact. Never look directly into the light source. Never leave any cables lying around. Never use the device during thunderstorms, unplug the device immediately.
OPERATING DETERMINATIONS This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 1.5 meter. The maximum ambient temperature ta = 45°C must never be exceeded. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable Pin L BROWN RED YELLOW/COPPER FASE N BLUE BLACK SILVER NUL YELLOW/GREEN GREEN GREEN EARTH Make sure that the device is always connected properly to the earth! Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Description of the device Features The Showtec LED Par 64 is a LED parcan with high output and great effects. • Never change lamps again! • High light-output • RGBW colormixing, offering vivid colors as well as the possibility to reproduce pastel colors • Equipped with a double bracket for multifunctional use • 18 x 4-in-1 LEDs • Drive Current: 450mA • Refresh rate: 7.
Installation Remove all packing materials from the LED Par 64. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
Multiple LED Pars (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. 2. Always use a safety cable (ordercode 70140 / 70141). 3. Use a 3-p XLR cable to connect the LED Pars and other devices. 4. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. 5.
Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. Important: Fixtures on a serial data link must be daisy chained in one single line.
The LED Par 64 can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel Fig. 5 A. LCD Display B. MODE button C. SETUP Button D. Up Button E. Down Button DMX Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address the next time.
Menu Overview 1. Auto Program 2. DMX Address 3. Slave 4. Sound-controlled 5.
Main Menu Options Auto DMX address Slave Sound controlled Built-in Programs 1. Auto Run Program 1) Press the MODE button on the device, until the display shows 2) With this menu you can play its auto program. . 2. DMX Mode With this menu you can set the DMX address. 1) Press the MODE button, until the display shows . 2) You can choose 512 different DMX addresses. Use the Up / Down buttons to select the required address from 3) You can also press the SETUP button to set a different DMX Mode. .
Red from 000-255 Flash Frequency from 00-99 Red from 000-255 Green from 000-255 Flash Frequency from 00-99 Green from 000-255 Flash Frequency from 00-99 Green from 000-255 Blue from 000-255 Flash Frequency from 00-99 Blue from 000-255 Flash Frequency from 00-99 Red from 000-255 Blue from 000-255 Flash Frequency from 00-99 Red from 000-255 Green from 000-255 Blue from 000-255 Flash Frequency from 00-99 Cool White from 000-255 Flash Frequency from 00-99 Red from 000-255 Green from 000-255 Blue from 000-255 Co
DMX Protocol The LED Par 64 can be operated with a controller in control mode or without the controller in stand-alone mode.
DMX Channels ( 8CH) Channel 1 – Master Dimmer intensity 0-255 Gradual adjustment Blue from 0 – 100% Channel 2 – Red (when CH7 is set to 0 0-255 ) Gradual adjustment Red from 0 – 100% Channel 2 – Macro Colors (when CH7 is set between 1-22 0 1-5 6-11 12-17 18-23 24-29 30-35 36-41 42-47 48-53 54-59 60-65 66-71 72-77 78-83 84-89 90-95 96-101 102-107 108-113 114-119 120-125 126-131 132-137 138-143 144-149 150-155 156-161 162-167 168-173 174-179 180-185 186-191 192-197 198-203 204-209 210-215 216-221 222-
Channel 2 – Audio Sensitivity (when CH7 is set between 253-255 0-255 ) Audio sensitivity from less sensitive to highly sensitive Channel 3 – Green 0-255 Gradual adjustment Green from 0 – 100% Channel 4 – Blue 0-255 Gradual adjustment Blue from 0 – 100% Channel 5 – Cool White 0-255 Gradual adjustment Cool White from 0 – 100% Channel 6 Strobe (Dimmer and CH2, CH3, CH4 or CH5 must be open 0-9 10-255 ) No Function Strobe effect, from slow to fast (0-20 flashes/sec.
160-169 170-179 180-189 190-199 200-209 210 211 212 213 • • • 251 252 253 254 255 ID16 ID17 ID18 ID19 ID20 ID21 ID22 ID23 ID24 • • • ID62 ID63 ID64 ID65 ID66 Maintenance The Showtec Compact Power Lightset requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and a soft cloth.
Troubleshooting No Light, No Movement - All Products This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. If the light effect does not operate properly, refer servicing to a technician. Response: Suspect two potential problem areas: the power supply, the fuse. 1. Power supply. Check that the unit is plugged into an appropriate power supply. 2.
Product Specification Model: Showtec LED Par 64 Never change lamps again! High light-output RGBW colormixing, offering vivid colors as well as the possibility to reproduce pastel colors Equipped with a double bracket for multifunctional use 18 x 4-in-1 LEDs Drive Current: 450mA Refresh rate: 7.