LED Pixel Track ORDERCODE 42200
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Pixel Track brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Pixel Track™ Product Guide Warning..…...................................................................................…………………………………………. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. Rigging…………………………………………………………………………………………………………. 2 2 3 3 Description..…..............................................................................……….………………………………… Features…….……………………………………………………………………………………….……...….
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord from time to time. If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device.
Description of the device Features The LED Pixel Track is a LED system from Showtec. • Sound-controlled via built-in microphone • 3 Modes: Stand-alone, DMX-controlled or Sound-controlled NOTE: Knowledge of DMX is required to fully utilize this unit. Overview Fig. 1 1) Safety Eye for Truss mounting 2) Total LED Pixel Track 648 LEDS 3) Mountingbracket for Truss mounting 4) Adjustment Screw Backside Fig.
Installation Remove all packing materials from the LED Pixel Track. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
Stand-alone Operation Refer to the four buttons on the front panel of the LED Pixel Track: Mode F/S Up Down Press the MODE button to view the Chase menu: Select Chases 1-9 using the UP and DOWN buttons. Chases 1-8 run according to the Fade and Speed values. Chase 9 is sound-active. Press the F/S button to set the Fade and Speed values: Adjust Chase Fade Time from 0-100%. Adjust Chase Speed from 1-500 steps per minute.
DMX Operation Press the MODE button to view the DMX address setting rnenu: Select the DMX starting address for the Pixel Drive 8 using the UP and DOWN buttons. The DMX Channel functions are: Channel 1: Channel 2: Channel 3: Channel 4: Channel 5: Channel 6: Rainbow Red (0-255) Green (0-255) Blue (0-255) Strobe (1-20HZ) Sound-active/ Audio sensitivity There are 8 modes of self-running programs (0-220) and 1 sound-active program (241-255) in Channel 6.
DMX Modes Press the MODE button to view the DMX mode selection menu. Use the UP and DOWN buttons to select the DMX mode.
Maintenance The LED Pixel Track requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specification Model: Showtec LED Pixel Track Voltage : AC 230V-50Hz (CE) Power: 115W Fuse: 250V / T1,5A Audio trigger: Built-in Mic DMX Input : 3-pin XLR Male connector DMX Output : 3-pin XLR Female connector Dimensions : 811 x 173 x 160 mm (LxWxH) Weight : 8,2 kg Design and product specifications are subject to change without prior notice.
2005 Showtec.
