LED Wash Ultra Bright RGB ORDERCODE 42454
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Wash Ultra Bright RGB brings excitement to any venue. Whether you want simple plug&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Wash Ultra Bright RGB™ Product Guide Warning.................................................................................…...……………..…………………………….………..…. Safety-instructions………………………………………………………………………………………………………… Operating Determinations.…………………………………………………………………………………………….. Rigging.…………………………………………………………………………………………………………………….. 2 2 3 4 Description...............................................................................…...………………………………………….………..
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged. Check the device and the powercord from time to time. Make sure that no side forces can impact on the truss system. The cable insert or the female part in the device must never be strained. There must always be sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly electrical shocks.
Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! Procedure: If the LED Wash Ultra Bright RGB is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the LED Wash Ultra Bright RGB, with the mounting-bracket, to the trussing system.
Description of the device Features The LED Wash Ultra Bright RGB is a LED system from Showtec. • Ultra bright LED • 252X High Power LED's (52x Red, 116x green and 84x Blue) • Reflected beam angle 18° • LED Lifetime 100.
Backside Fig. 2 1) Earth 2) Power Cable 3) Fuse 0,5A 4) 3-pin DMX signal connector (IN) 5) 3-pin DMX signal connector (OUT) 6) Dip Switches Installation Remove all packing materials from the LED Wash Ultra Bright RGB. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
Multiple LED Wash Ultra (DMX Control) 1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp bolted onto the Showtec LED Wash bracket). Leave at least 0,5 meter on all sides for air circulation. 2. Use a 3-p XLR cable to connect the LED Wash’s and other devices. 3. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. 4.
FUNCTIONS: There are 4 options for using the LED Wash Ultra Bright RGB: Stand-alone Music-controlled Master / Slave DMX Mode 1. Stand-alone / Master In Stand-alone mode, set all dipswitches to OFF. 2. Sound-controlled In Stand-alone mode, set dipswitch #9 to ON and all other dipswitches to OFF. The LED Wash Ultra will automatically change its color to the beat of the music. With the Audio Sensitivity control you can adjust its music-sensitivity. 3.
DMX Dipswitch Settings DMX products must have their own "address" to receive DMX signals. Addresses on the controller are set by flipping the appropriate DMX dipswitches. You need to know that DMX address settings are the sum of the dip switch values.
DMX Address Quick Reference Chart Dip Switch Position DMX DIP SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=OFF #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=ON #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 #6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 #1 #2 #3 #4 #5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 1 0 0 0 0 1 33 65 97 129 161 193 225 257 289 321 353 385 417 449 481 0 1 0 0 0 2 34
DMX Channels Channel 1 – Dimmer / Strobe / Sound controlled 0-189 190-250 251-255 Dimmer, from closed to open (0-100%) Strobe 1-20 Hz Sound-controlled Channel 2 – Red 0-255 Gradual color brightness from 0 to 100% Channel 3 – Green 0-255 Gradual color brightness from 0 to 100% Channel 4 – Blue 0-255 Gradual color brightness from 0 to 100% Maintenance The LED Wash Ultra Bright RGB requires almost no maintenance. However, you should keep the unit clean.
Product Specification Model: Showtec LED Wash Ultra Bright RGB Power; 34W Power Supply 230V Ac/50Hz Fuse: 0,5A 252 LEDs (52 Red, 116 Green, 84 Blue) Beam angle: 18° LED Lifetime: 100.000 hours Colour mixing system RGB Protocol DMX512: 4 Channels Standalone, Master-slave, Music controlled DMX Connection XLR 3-pins Aluminium with black finish Internal microphone Including 100cm power cable including power plug Transmit cooling Ambient temperature 0°C/40°C Dimensions: 455 x 155 x 125 mm (LxWxH) Weight 3.