LED Wash Ultra Bright RGB ORDERCODE 42454 V3
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Wash Ultra Bright RGB brings excitement to any venue. Whether you want simple plug&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Wash Ultra Bright RGB™ Product Guide Warning.................................................................................…...……………..…………………………….…………. Safety-instructions………………………………………………………………………………………………………. Operating Determinations.…………………………………………………………………………………………… Rigging.…………………………………………………………………………………………………………………… Return Procedure……………………………………………………………………………..................................... Claims……………………………………………………………………………..............................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never leave any cables lying around. Never look directly into the light source. Never use the device during thunderstorms, unplug the device immediately. Do not insert objects into air vents. Do not open the device and do not modify the device.
OPERATING DETERMINATIONS This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 0,5 meters. The maximum ambient temperature ta = 45°C must never be exceeded. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Description of the device Features The LED Wash Ultra Bright RGB is a LED system from Showtec. • Ultra bright LED • 252X High Power LED's (52x Red, 116x green and 84x Blue) • Reflected beam angle 18° • LED Lifetime 100.
Backside Fig. 2 1) Earth 2) Power Cable 3) Fuse 0,5A 4) 3-pin DMX signal connector (IN) 5) 3-pin DMX signal connector (OUT) 6) Dip Switches Installation Remove all packing materials from the LED Wash Ultra Bright RGB. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
One LED Wash Ultra Bright RGB (Sound-control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. Plug the end of the electric mains power cord into a proper electric power supply socket. 2. When the device is not connected by a DMX-cable, it functions as a stand-alone device. For sound control dipswitch #9 must be set to ON. The other dipswitches must be OFF. Turn on the music, then the LED Wash Ultra Bright RGB will react to the beat of the music.
Multiple LED Wash Ultra (DMX Control) 1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp bolted onto the Showtec LED Wash bracket). Leave at least 0,5 meter on all sides for air circulation. 2. Use a 3-p XLR cable to connect the LED Wash’s and other devices. 3. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. 4.
Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. Important: Fixtures on a serial data link must be daisy chained in one single line.
DMX Dipswitch Settings DMX products must have their own "address" to receive DMX signals. Addresses on the controller are set by flipping the appropriate DMX dipswitches. You need to know that DMX address settings are the sum of the dip switch values.
DMX Address Quick Reference Chart Dip Switch Position DMX DIP SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=OFF #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=ON #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 #6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 #1 #2 #3 #4 #5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 1 0 0 0 0 1 33 65 97 129 161 193 225 257 289 321 353 385 417 449 481 0 1 0 0 0 2 34
DMX Channels Channel 1 – Dimmer 0-255 Dimmer, from closed to open (0-100%) Channel 2 – Red 0-255 Gradual color brightness from 0 to 100% Channel 3 – Green 0-255 Gradual color brightness from 0 to 100% Channel 4 – Blue 0-255 Gradual color brightness from 0 to 100% Channel 5 – Strobe 0-10 11-255 No function Strobe from slow to fast (1-20 Hz) Maintenance The LED Wash Ultra Bright RGB requires almost no maintenance. However, you should keep the unit clean.
No Response to DMX Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 1. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try your DMX control again. 2. Determine whether the controller or light effect is at fault. Does the controller operate properly with other DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light effect to a qualified technician.
Product Specification Model: Showtec LED Wash Ultra Bright RGB Ultra bright LED 252X High Power LED's (52x Red, 116x green and 84x Blue) Reflected beam angle 18° LED Lifetime 100.
