Product guide

12
Press the SCENE (28) or CHASE (30) button, which has to be programmed. Set the faders (38) to the
desired position. The faders (41) have address 129 – 136. These addresses can’t be patched.
When this has been done, you can store the step(s) by pressing the RECORD button (15) (a SCENE has
one step, a CHASE has multiple steps).
Exit Record
Press the ESC button (16) when all steps have been entered, then press the button again to exit the menu.
Play Scene / Chase
The LEDs of the pre-programmed “scenes” illuminate green. The “scenes” of which the LEDs are off, are
not programmed. Press the button of the “scene” or “chase” you want, to activate it. Press the button again
to deactivate. The LEDs from the “chase” only blink after the chase has been activated/selected. Chases
that haven’t been programmed can’t be selected.
Page (32)
When the PAGE button (32) has been activated, you can view the pages of the conventional light effects.
Fade time
It is possible to add a fade time to the steps. In this way you can beautifully fade in/out a “scene”. First leave
the “record”-mode and set the “fade” time with the right “speed-fader” (39). Push the FADE+SPEED button
(36). When the LED is on, FADE has been selected. Now press the “scene” you want to activate, this scene
will now fade-in. When the LED is off, SPEED has been selected.
Step (33)
When a “chase” is running, all steps can be manually walked through by pressing the STEP button (33).
Tap sync (34)
With this function you can press the “chase” speed manually. The speed, with which you press the button, is
the speed of the “chase”. This option is often used when the “chase” has to follow the rhythm of the music.
Stand-by (35)
With this function the Light Desk Pro 136 is set to a stand-by mode. The programs keep on running, but
DMX output for conventional light is off. This function is almost the same as the “blackout” function for
moving light effects.
Fade+speed (36)
With this function you can set the way the steps follow each other. When using a “fade”, the set time on the
“speed”-fader (39) will be the fading time between 2 steps. When using a “speed”, the set time on the
“speed”-fader will be the waiting time between 2 steps. When the LED is on, FADE has been selected.
When the LED is off, SPEED has been selected.
This function is for “chase” programs as well as “scene” programs.
Audio (37)
When audio is activated, the “chase” will respond to the music via the internal mic.
Use the AUDIO fader to set or adjust the sensitivity of the sound controlled mic.
Full On (38)
When pushing this button, all channels of the conventional light will be at 100%.