Product guide

7
this button to record Scenes or Chases.
16) ESC button
To cancel relevant operation or to exit.
17+18) UP/DOWN buttons
To select or adjust desired item or level during operation.
19) CH.PAGE button
Press this button to switch between CH 1-8 and CH 9-16. LED “off ” means 1-8 channels available,
while LED “on “ means 9-16 channels available.
20) Up button
Used to adjust PAN / TILT movement.
21) FINE button
Use this button can adjust relevant level finely by a small margin .
22) Left buttons
Used to adjust PAN / TILT movement.
23) Joystick
Used to control and adjust relevant level more conveniently through the Pan or Tilt movement.
24) Right button
Used to adjust PAN / TILT movement.
25) SPEED fader
Used to set or adjust relevant speed as user’s desire.
26) FADE fader
Used to set or adjust relevant fade as user’s desire.
27) Down button
Used to adjust PAN / TILT movement.
28) SCENE buttons
Press the scene buttons to load or store relevant Scenes.
29) AUTO button
Used to activate AUTO mode.
30) CHASE buttons
These buttons are used to load or store relevant Chases.
31) ONE/MIX/SEQ button
To select One mode, Mix mode or Sequence mode.
32) PAGE button
To select relevant Scene-page or Chase-page.
33) STEP button
34) TAP SYNC button
Repeatedly tap this button to establish different chase rate.
35) STANDBY button
Press this button to enable or disable relevant output of PARs. Its function is similar to the BLACKOUT
button.
36) FADE + SPEED button
To select FADE TIME or NO FADE TIME.
37) AUDIO button
To adjust for best audio effect.
38) FULL ON button
Press this button to output all the PARs at full intensity.
39) SPEED fader
Used to set or adjust relevant speed as user’s desire.
40) AUDIO fader
Used to set or adjust the sensitivity of the sound controlled mic.
41) FADE fader
Used to adjust the FADE TIME level.
42) MASTER fader
Used to proportionally and totally change the overall console output.