Product guide

12
Chase Programming
A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory. See “Delete All Chases” for instructions.
CREATE A CHASE
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
1) Press and hold the PROGRAM button for 3 seconds.
2) Press the CHASE (1~6) button you wish to program.
3) Change BANK if necessary to locate a scene.
4) Select the SCENE to insert.
5) Tap the MIDI/ADD button to store. All LED’s will flash 3 times.
6) Repeat steps 3 ~ 5 to add additional steps in the chase. Up to 240 steps can be recorded.
7) Press and hold the PROGRAM button for 3 seconds to save the chase.
COPY BANK INTO CHASE
1) Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2) Select the BANK to be copied using the BANK UP/DOWN buttons.
3) Press MUSIC/BANK COPY and Midi/Add buttons at the same time to copy.
4) Press and hold the PROGRAM button for 3 seconds to exit programming mode.
ADDING A STEP TO A CHASE
1) Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2) Press the desired CHASE (1~6) button.
3) Press the TAPSYNC/Display and the display will display the scene and bank number. This displays the
scene you will be adding (STEP LED must be on),
4) Use the BANK UP/DOWN buttons to scroll through the chase and arrive at the step number for which
you would like to add or append a scene/step to.
5) Press MIDI/ADD button and one step number will be added to the previously displayed step number.
6) Press the SCENE button that corresponds to the scene to be copied.
7) Press MIDI/ADD button again to add the new step.
8) Press and hold the PROGRAM button for 3 seconds to exit programming mode.
DELETE A SCENE/STEP IN A CHASE
1) Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2) Press the desired CHASE (1~6) button that contains the scene to be deleted.
3) Press the TAPSYNC/DISPLAY button to switch the LED display to steps.
4) Select the scene/step to be deleted using the BANK UP/DOWN buttons.
5) Press AUTO/DEL button to delete the step/scene.
6) Press and hold PROGRAM button for 3 seconds to exit.
DELETE A CHASE
1) Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2) Press the CHASE button (1~6) to be deleted.
3) Press and hold the AUTO DEL button and the respective CHASE button then release to delete the
chase. All LED’s will blink 3 times.
DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual
scenes and program banks will be preserved.
1) Press and hold the BANK DOWN button and the AUTO DEL button while turning OFF the controller.