Product guide

Lens Locations

The different lenses used in the Moon Light are not interchangeable. When installing a new lens, refer to the

illustration below for proper placement. Also, remember to have the lens' color designator dot facing the

color frame.

Fig. 5

Centering and adjusting the lamp

The marked "A,B,C" three adjustive screws located on the rear lamp housing allow you to center the lamp

within the reflector and adjust its beam field (See Figure 6 mark A. B. C.).

1. Turn on the Moon Light and aim it at a flat surface.

2. Loosen (counterclockwise) or tighten (clockwise) the A, B, C three screws in turn until the lamp is

centered within the reflector and achieve an optimum flat field (most bright and most rounded).

Fig. 6