Product guide

14
4. Built-in Programs
1) Press and hold down the LEFT button on the device for 3 seconds at a time, until the display
shows .
2) With this menu you can set the Built-in Program Mode of the Cameleon Bar.
You can choose 7 built-in programs , by using the RIGHT button.
3) Press LEFT to enter the built-in programs Menu. You can choose 2 different sub menus:
See below the complete menu:
Red 00 – 51
Flash Frequency from 00-99
Red 00 – 51
Green 00 – 51
Flash Frequency from 00-99
Green 00 – 51
Flash Frequency from 00-99
Green 00 – 51
Blue 00 – 51
Flash Frequency from 00-99
Blue 00 – 51
Flash Frequency from 00-99
Red 00 – 51
Blue 00 – 51
Flash Frequency from 00-99
Red 00 – 51
Green 00 – 51
Blue 00 – 51
Flash Frequency from 00-99
OFF
Thermal Protection for PCB mainboard
TL1=48°, TL2=49°, TL3=50°, TL4=51°
Speed from 00-99 and FL
Flash Frequency from 00-99