Club Spot 575 ORDERCODE 40135
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Club Spot 575 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Club Spot 575™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. Rigging…………………………………………………………………………………………………………. 2 2 3 4 Description..…..............................................................................……….………………………………… Features and Overview ………………………………...….……………….………….………………….….
WARNING CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • • • • Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened. Only operate the device after having familiarized with its functions. Avoid flames and do not put close to flammable liquids or gases. Always replace the lamp, when it is damaged or deformed due to the heat. Always keep case closed while operating. Always allow free air space of at least 50 cm around the unit for ventilation.
Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! Procedure: • • • • • If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the projector, with the mounting-bracket, to the trussing system. The projector must never be fixed swinging freely in the room.
Mounting a clamp to the underside of the club Spot moving head 1) Clamp 2) Safety-cable 3) Eye bolt 4) Mounting plate Improper installation can cause serious damage to people and property ! Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.
Description of the device Features The Showtec Club Spot 575 is a moving head with high output and great effects. • 1 Color-wheel with 7 colored gobos, and open • 1 Gobo-wheel with 2 glass and 5 metal interchangeable rotating gobos plus open • 1 Static Gobo-wheel with 7 rotating gobos plus open • DMX-control via standard DMX-controller • 12 DMX-control channels required • Strobe-effect with adjustable speed (1 - 10 flashes/sec.
Backside 4 5 6 7 Fig.
Installation Installing the Lamp The Showtec Club Spot 575 uses the HMI 575 (ordercode 80901O) reflectorbulb as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information. Always disconnect from electric mains power supply before changing lamps. The lamp has to be replaced when it is damaged or deformed due to the heat.
Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. One Club Spot 1. Fasten the moving head onto firm trussing (Use a 30-kg rated or stronger C-clamp fastened onto the Club Spot ). Leave at least 1 meter on all sides for air circulation. 2.
Fig.
DMX Protocol Channel 1 – Colours Linear color change following the movement of the slider. In this way you can stop the color-wheel in any position – also between two colors creating double-colored beams. Between 128 - 191 and between 192 255, the color-wheel rotates continuously the so-called “Rainbow” effect.
Channel 4 – Static Gobos 0-8 9-15 16-23 24-31 32-39 40-47 48-55 56-63 64-71 72-79 80-87 88-95 96-103 104-111 112-119 120-127 128-191 192-255 Open / white Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Open / white Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Positive Rainbow effect with increasing speed Negative Rainbow effect with increasing speed Channel 5 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN).
The Club Spot 575 can be operated with a controller in control mode or without the controller in standalone mode. Control Panel When the indicator light is on, means the Club Spot is working Fig. 6 A. Up Button B. Down Button C. [MODE] Button Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller.
Dmx Mode: Light 1 DMX Mode: Light 2 Master Mode: Sound-control Slave Mode: Slave 1 Master Mode: Slow Slave-Mode Slave 2 Master Mode: Standby Slave-Mode Slave 3 Use Time: Hour Slave-Mode Slave 4 Pan Mode: Positive Tilt-Mode Positive Pan Mode: Negative Tilt-Mode Negative LED positive: Display LED negative Display Fig.
Remotely controllable functions Colour-wheel The Club Spot contains a colour-wheel with 7 colours and white. The colour-wheel can be positioned between two adjacent colours in any position. It is also possible to rotate the colour-wheel continuously at different speeds ( “Rainbow effect” in both directions). Rotating gobo-wheel This rotating gobo-wheel has 5 metal gobos, 2 glass gobos and open. Static gobo-wheel This static gobo-wheel has 7 gobos and open.
Gobowheel Static Gobowheel Rotating Fig. 8 Fig. 9 Colorwheel Fig.
Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every four years in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year. The following points have to be considered during the inspection: 1.
Replacing a Gobo Gobo-wheel with rotating gobo’s 1. Disconnect mains power supply and set the switch to OFF. 2. Make sure that the gobo you want to insert has the same size. 3. Remove the maintenance caps. 4. Turn the gobo wheel, with the gobo you want to remove, to the upside. 5. Very carefully take the pinchcock (fig 11 and 12) out of the gobo wheel, but pay attention that the pinchcock does not fall in the device. Then push the gobo out. 6. Place the new gobo in the gobo wheel.
Problem One or more fixtures are completely dead. Fixtures reset correctly, but all respond erratically or not at all to the controller. Probable cause(s) No power to the fixture Remedy ·Check that power is switched on and cables are plugged in. Primary fuse blown. ·Replace fuse. The controller is not connected. 3-pin XLR Out of the controller does not match XLR Out of the first fixture on the link (i.e. signal is reversed). ·Connect controller.
Product Specification Model: Showtec Club Spot 575 Voltage: 240V-50Hz (CE) Power: 800W Fuse: 10A / 250V Dimensions: 360x325x530mm (LxWxH) Weight: 25 kg Operation and Programming Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+) Set Up and Addressing: LED control panel DMX Channels: 12 Signal input 3-pin XLR male Signal output 3-pin XLR female Lamp Allowed lamp models*: Osram HMI 575 (1000 hr) ordercode 80901O Control: Automatic and DMX remote ON / OFF Electro-mechanical effects Colors: 7 colors plus white G
2005 Showtec.
