Spectral D4000 IP67 ORDERCODE 43504
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Spectral D4000 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Spectral D4000™ Product Guide Warning.................................................................................…...……………..…………………………….………..… Safety-instructions……………………………………………………………………………………………………….. Operating Determinations.……………………………………………………………………………………………. Rigging.………………………………………………………………………………………………………………….… Return Procedure……………………………………………………………………............................................... Claims…………………………………………………………………….................................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact. Never look directly into the light source. Never leave any cables lying around. Never use the device during thunderstorms, unplug the device immediately.
OPERATING DETERMINATIONS This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 1.5 meter. The maximum ambient temperature ta = 45°C must never be exceeded. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.
Description of the device Features The Spectral D4000 indoor/outdoor colour wash is a LED Par from Showtec with 48 high power LEDs • 3, 3, 4, 4, 5, 6 or 11-channel LED wash light (with ID addressing) • 7 different DMX Operating modes • RGBW colour mixing with or without DMX controller • Colour temperature presets (3,200 K ~ 10,000 K) • Built-in automated programs via DMX • Recall custom programs via DMX • High-power, 2 W ~ 3 W (750 mA ~ 1,000 mA) LEDs • Ingress Protection: IP67; suitable for indoor and outd
Arc.2 Channel 1 2 3 4 Ar2.d Channel 1 2 3 4 5 Ar2.s Channel 1 2 3 4 5 6 HSV Channel 1 2 3 Description Red Green Blue White Description Master Dimmer Red Green Blue White Description Master Dimmer Red Green Blue White Strobe Description Hue Saturation Value Overview 1 2 Fig.
Backside 4 6 5 7 Fig. 2 4) Power IN 5) DMX signal connector (IN) 6) Power OUT 7) ) DMX signal connector (OUT) 4 Note: 5 6 7 You cannot plug a standard DMX cable directly into the connector Be sure to use the included special cable for DMX connection.
Installation Remove all packing materials from the Spectral D4000. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
The Spectral D4000 has a total of 7 DMX channel configurations, referred to as Personalities. The 7 personalities are [STAG, ARC.1, AR1.d, ARC.2, AR2.d, AR2.s, HSV]. Each of the different personalities can be accessed from the control panel. Control Panel Fig. 5 A. Display B. MENU Button C. ENTER Button D. Upn Button E. Down Button DMX512 ADDRESSING WITHOUT ID ADDRESSING 1) Connect a DMX controller (example 50720 Showdesigner 1024) to the series of Spectral D4000„s.
DMX512 ADDRESSING WITH ID ADDRESS (STAG MODE) 1) Connect a DMX controller (example 50720 Showdesigner 1024) to the series of Spectral D4000„s. 2) Each Spectral D4000„s has 11 DMX channels (DMX address LED Par #1=1, Par #2=12, Par #3=23, Par #4=34, etc.). 3) Any DMX address in the range from 001 to 512 may be used. 4) Each DMX address may carry up to 66 separate ID addresses. 5) The ID Address should be set in the SETTINGS menu, on each unit in ascending values (i.e. 1,2,3...).
MENU OVERVIEW 12
Main Menu Options Press the MODE button to scroll through 11 options of the menu: Creating a static color When you press ENTER in menu Static color, you have to use ENTER to scroll through this menu. Use the UP/DOWN buttons to change the static colors (Red, Green, Blue, White) or the strobe speed (020Hz). Press MENU to go 1 step back. You can combine RED, GREEN, BLUE and WHITE to create an infinite range of colors (0-255). Red Set the value of the red LEDs (0-255).
Activating an Auto Program When you press ENTER in menu Auto Program, you can choose one of the 10 built-in programs. You can also edit 10 custom programs.
Run Mode • Enter the RUN MODE mode to set the desired working mode: - DMX mode is used when working with a DMX512 controller to control the LED Par. - SLAVE mode is for using the device during a Master-Slave operation. When the fixtures are in Auto program operation, the RUN MODE does not work. DMX 512 Address When you press ENTER in menu DMX 512 address you can set the DMX address. You can choose your DMX address between 0-512.
Edit Custom • Enter the EDIT CUSTOM mode to edit the custom programs PR01 – PR10. • Each custom program has 30 steps, which can be edited. • Each step allows the creation of a scene using RED, GREEN, BLUE, WHITE, STROBE, TIMER & FADE.
1) Enter UPLD to upload the custom programs from the current MASTER device to all SLAVE devices. In order to activate the upload function the password must be entered. Password: UP > DOWN > UP > DOWN. Then press ENTER to confirm your password. When uploading the MASTER and SLAVE units will light up YELLOW. If an error occurs when uploading the MASTER and/or SLAVE devices will light up RED. When uploading one of the custom programs has been successful, the MASTER and SLAVE devices will light up GREEN.
White Balance • Enter CAL2 to adjust the RGB parameters to create different white color temperatures. •When the new setting has been activated, the DMX controller chooses RGB = 255,255,255, the white color will be made by the actual RGB values on the CAL2 Menu. Activate Password • Enter the KEY-LOCK mode to select, whether the access password is On or Off. • The Access Password: UP + DOWN + UP + DOWN . When you have pressed ENTER in menu KEY ON, it will take 30 seconds before the LED Par is locked.
How to make your own Custom Program Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values And so you can add a maximum of 30 scenes.
DMX Control STAG Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 5 000 – 255 6 000 – 005 006 – 020 021 – 030 031 – 050 051 – 070 071 – 090 091 – 110 111 – 130 131 – 150 151 – 170 171 – 190 191 – 200 201 – 205 206 – 210 211 – 215 216 – 220 221 – 225 226 – 230 231 – 235 236 – 240 241 – 245 246 – 250 251 – 255 7 000 – 010 011 – 255 8 000 – 020 021 – 030 031 – 040 041 – 050 051 – 060 061 – 070 071 – 080 081 – 090 091 – 100 101 – 110 111 – 120 121 – 130 131 – 140 141 – 150 151 – 16
9 000 – 255 000 – 009 010 – 069 070 – 129 130 – 189 190 – 255 Channel 11 (ID address selection) 000 – 009 All ID‟s 212 010 – 019 ID 1 213 020 – 029 ID 2 214 030 – 039 ID 3 215 040 – 049 ID 4 216 050 – 059 ID 5 217 060 – 069 ID 6 218 070 – 079 ID 7 219 080 – 089 ID 8 220 090 – 099 ID 9 221 100 – 109 ID 10 222 110 – 119 ID 11 223 120 – 129 ID 12 224 130 – 139 ID 13 225 140 – 149 ID 14 226 150 – 159 ID 15 227 160 – 169 ID 16 228 170 – 179 ID 17 229 180 – 189 ID 18 230 190 – 199 ID 19 231 200 – 209 ID 20 232
DMX Control ARC1 Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 Function Red 0 – 100 % Green 0 – 100 % Blue 0 – 100 % DMX Control AR1.d Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 Function Dimmer 0 – 100 % Red 0 – 100 % Green 0 – 100 % Blue 0 – 100 % DMX Control ARC2 Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 Function Red 0 – 100 % Green 0 – 100 % Blue 0 – 100 % White 0 – 100 % DMX Control AR2.
DMX Control HSV Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 Function Hue (Color variations) 0 – 100 % Saturation of color Red 0 – 100 % Value (Dimmer) 0 – 100 % DMX Value – ID Addresses DMX 0-9 10-19 20-29 30-39 40-49 50-59 60-69 70-79 80-89 90-99 100-109 110-119 120-129 130-139 140-149 150-159 160-169 170-179 180-189 190-199 200-209 210 211 212 213 214 215 216 217 218 219 220 221 222 ID addresses Select all ID addresses ID address #1 ID address #2 ID address #3 ID address #4 ID address #5 I
Beam Angles 24
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are perfectly efficient: a great number of problems are caused entirely by using unsuitable or faulty cables.
Product Specification Power Supply: AC 100V-240V, 50/60 Hz Power consumption: 180 Watt 48 LEDs/unit: 12 x 750 mA red 12 x 1.000 mA green 12 x 1.000mA blue 12 x 1.
