Product guide

15
Run Mode
• Enter the RUN MODE mode to set the desired working mode:
- DMX mode is used when working with a DMX512 controller to control the LED Par.
- SLAVE mode is for using the device during a Master-Slave operation.
When the fixtures are in Auto program operation, the RUN MODE does not work.
DMX 512 Address
When you press ENTER in menu DMX 512 address you can set the DMX address.
You can choose your DMX address between 0-512.
Personality
Enter the PERSONALITY mode to select a DMX mode: STAG, ARC1, AR1d, ARC2, AR2d, AR2s, HSV.
STAG: 11 channels
ARC1: 3 channels
AR1d: 4 channels
ARC2: 4 channels
AR2d: 5 channels
AR2s: 6 channels
HSV: 3 channels
ID Address
Enter the ID ADDRESS mode to set the desired ID ADDRESS; range ID1 – ID66.