Studiobeam MSR-575 ORDERCODE 30708
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Studiobeam brings excitement to any venue. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied. For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec.
Showtec Showtec Studiobeam™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations…………………………………………………………………………………….. Installing the Studiobeam with a Clamp/Hook……………………………………………………………… Rigging………………………………………………………………………………………………………….. 2 2 4 4 5 Description..…..............................................................................……….……………………………….
WARNING CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • • • • • • Always disconnect power from the mains, when device is not used, before cleaning or when replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord. Make sure that the device is not exposed to extreme heat, moisture or dust. Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged.
OPERATING DETERMINATIONS This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 2 meters. The maximum ambient temperature ta = 45°C must never be exceeded. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! Procedure: • • • • • If the Studiobeam is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the Studiobeam, with the mounting-bracket, to the trussing system.
Description of the device Features The Studiobeam MSR-575 is a Studiobeam from Showtec with RGB-Mix. • Lamp: MSR 575 240V/575W (80915 / 80915O / 80923) • Electronic ballast ensuring maximum and stable light output • 4 lenses included: VNSP, NSP, MFL, WFL Overview Fig.
Installation Installing the Lamp The Showtec Studio Beam uses a MSR 575W (ordercode 80915 / 80915O / 80923) bulbs as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information. Always disconnect from electric mains power supply before changing lamps. The lamp has to be replaced when it is damaged or deformed due to the heat.
Installing a Lens 1. When installing the lens, make sure the fixture is on a safe height. Please prevent people from walking under the fixture, when replacing the lens ! 2. Position the fixture with the frontside of the unit (Lens Side) facing you. Then tilt its head slightly (Fig. 5). 3. Position the lens rotation ring with the spring clip at the top of the fixture, below the retaining clip. 4. Hold the lens by its edge and position it so, that the convex side faces the back of the fixture (Fig. 6).
Color Frame Retaining Clip The color frame holder is equipped with a spring-loaded retaining clip that prevents color frames and accessories from falling out. Warning !!! Always hang the Studiobeam with the color frame retaining clip in the locked position. 1. Release the retaining clip by pushing it sideways. The retaining clip opnes. 2. Insert the color frame 3. Press the retaining clip down until it locks. Note: Only use color frames or tophats with a 17 cm diameter.
Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every year in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year. The following points have to be considered during the inspection: 1.
Troubleshooting This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. 1. If the device does not operate properly, unplug the device. 2. Check the lamps, the fuse, power from the wall, all cables etc. 3. If all of the above appears to be O.K., plug the unit in again. 4.
Product Specification Model: Showtec Studiobeam Voltage: AC 230V-50Hz (CE) Power: 600W Cooling: Ventilator Dimensions: 300 x 250 x 450 mm (LxWxH) Weight: 7,0 kg Lamp Allowed lamp models*: Philips MSR 575 (1000 hr; 6000K) ordercode 80915 Osram HSR 575/2 (750 hr) ordercode 80915O Philips MSR 575 (1000 hr; 7200K) ordercode 80923 *: Versions for other lamps may be produced. Please check the specification label on your product. Design and product specifications are subject to change without prior notice.
2006 Showtec.
