User's Manual

Table Of Contents

3 4

1. Push

C. Button Function

B. [Reset]: Press and reset the push, after 7 secs,

the push will transmit updated temperature data to

the receiver.

A.[Push]: Press and initiate the door bell.

F. [SELECT]: Press to select 32 melodies.

2.Receiver

B. [SET]: In normal status, press for 12/24 mode shift,

pressing more than 2 seconds to set Time/Alarm.

A. [MODE]: Time, Alarm 1, Alarm 2.

C. [UP]: In normal status, press to activate Alarm1, Alarm2

or both. In setting status, press to put forward the time.

D. [DOWN]: In setting status, press to put backward the time.

E. [MEM]: Press to shift Max/Min temperature respectively for

indoors and outdoors. Pressing for more than 2 secs

to erase the record of Max. & Min. temperature data.

G. [ C/ F]: Press to shift C/ F degree. Press 2 secs to re-start

the receipt of outdoor temperature from the push unit.

H.[Reset]: Press to reset the system both for time and thermometer.

3. Operation Instruction

A. Clock Setting

In normal status, press [SET] key more than 2 seconds to

set time and date. The setting sequence is hour and minute,

press [UP] key and [DOWN] key to change the flashing digit.

After setting, press [SET] key or no operation for 10 seconds,

it will exit and display the current setting time.

B. Alarm Setting

In normal status, press [MODE] to set the Alarm1, then press

[SET] for 2 secs, set the alarm time. Same as the time setting.

Press [SET] to settle the setting. Re-press [MODE] can start

setting of Alarm2, same as the Alarm1 setting.

C. 12/24 mode & C/ F Shift

In normal status, press SET key to shift from 12/24 hour mode.

4. Wireless Date Search & Receive

After reload of batteries or press reset on the receiver, the

receiver will begin to search wireless data for 5 mins.

After reload of batteries or press reset on the push, the push

will transmit outdoor temperature data to receiver one time

per 83 secs. Once the receiver can receive the data, the LCD

will display the ourdoor temperature and will update the data

per 83 secs. Otherwise the LCD will display ----- means

can not receive any data from push, record is blank.