User's Manual

9
2.3 Power on/off
In power-off state, press the power key to power on the camera.
In power-on state, press the power key to power off the camera.
In power-on state, let the camera idle for 1 minute（default）to power off the camera
automatically.
In power-on state, when battery level is very low, the camera will turn off after several
seconds. You must replace the batteries.
2.4 Change mode
After power on, it will enter video recording mode, press MODE key to change mode
between video record、 Still photo record， Playback;
2.3 Video record
In Video record(Preview) mode, press Shutter key to start video recording, While recording,
press the Shutter key again to stop recording.
At preview or recording mode, Press Up key or Down key can zoom in or zoom out the
image.