User's Manual

8
2. Basic operation
2.1 Install battery
Press / slide down the Battery Cover and insert 3pcs AAA battery. Align
with correct polarity of battery terminals. then close the Battery Cover.
2.2 Use SD/MMC/SDHC card
Insert the SD Memory card into the SD/MMC/SDHC Card Slot. Push it
down until the card stays latched. Do not force – check card’s position
according to the position mark on the camera.
Push and release inserted card if you wish to remove or replace the card.
Turn your camcorder OFF before inserting / removing the SD Card.
- Note that the SD Card has a tiny LOCK switch on the side. Set the
switch to un-LOCK position to be able to store recorded videos, still
pictures on inserted SD Memory Card.