User Manual

19
 Remember to put the Mode Switch in your desired recording position before inserting the camera in the
waterproof case. There is no external button for the Mode Switch.
 After every use in salt water you will need to rinse the outside of the housing with non-salt water and dry.
Not doing this can eventually cause corrosion of the hinge pin and salt buildup in the seal, which can cause
failure.
 To clean the seal, rinse in fresh water and shake dry (drying with a cloth may cause lint to compromise the
seal). Re-install the seal into the grooves in the backdoor of the housing.
Technical parameters
Image sensor 5M pixels (CMOS)
Function mode Video recording, photo, removable disk
Camera lens F3.1 f=2.9mm
Digital zooming 4X
Shutter Electronic shutter
LCD display screen 2.4-inch touch screen
Image resolution 12M (4000 × 3000), 10M (3648x2736), 8 M (3264x2448), 5M (2560×1920)
Video resolution
VGA: 640x480 (120 frames / sec), HD: 1280x720 (60 frames/sec.) HD: 1280x720
(30 frames/sec), FHD: 1920x1080 (30 frames/sec.)
White balance Automatic
Exposure Automatic