Panoramic View Camera PDV1800 1
User’s Manual Description of appearance and keys 2
1. LCD display screen 2.Shutter key 3.Power/Mode 4.Wifi key 5.Busy indicator (red) 6. Charging indicator (blue) 7. WIFI indicator (red) 8. Lens 9. Gear adjusting triangle nut 10. Interface lid (USB, HDMI) 11.Speaker Use your WIFI camera 1. First insert a micro SD or micro SDHC card, as shown in the right figure: A high-speed card of Class 6 or above is recommended, and a Class 10 card is needed for video recording in professional mode.
2. Power on/off Power on: Press and hold Power key for about 2 seconds and release it, accompanied by a sound of the buzzer, the LCD screen will be started (video recording mode is started by default), and the working indicator in red/Busy indicator will be normally on. Power saving mode: The device will enter power saving mode when it is in an idle state for one minute (default setting of the system) without any operation, LCD display will be turned off automatically.
3. Charging the camera An external chargeable lithium battery is used in this device, and its installation is as shown in the figure below: Open the cover of the battery: Mount the battery as per the correct marks for positive and negative poles; Then put on the cover of the battery; In power-off state, connect the device to the USB interface of the computer with a USB cable for charging. The charging indicator will be in blue in charging.
4. Switch of functional modes This video camera has three modes: video recording mode, driving mode and photographing mode. After power is on, modes can be switched by pressing Power/Mode key, or through APP. Video recording mode: As illustrated below, press Shutter key to start video recording, accompanied with a sound from the buzzer. In video recording, Busy indicator will be flashing in red all the time, and LCD timer will start timing. To stop video recording, press this key again.
Driving mode: In driving mode, video will be recorded in a cycled way, with a passage of video being recorded for three minutes by default. When the card is full, the file recorded earliest will be deleted automatically so that video recording can continue. As illustrated below, press Shutter key to start video recording, accompanied with a sound from the buzzer. In video recording, Busy indicator will be flashing in red all the time, and LCD timer will start timing.
Photographing mode: After switching to photographing mode, press Photograph key to take a photo, accompanied with a sound from the buzzer, and Busy indicator will be flashing in red all the time in photographing. After photographing, the timer will count in a decreasing way.
5.
6. Application of watch-type remote controller: 1. Definition of keys on the watch-type remote controller: Keys of the remote controller are illustrated as below: 1. Power key 2. Video recording key 3. Photographing key 4. Key indicator (red) 5. Watch band 6. Watch buckle 2.
3. Turn on or off the camera with the watch-type remote controller Power on: Hold key till indicator is off and release, the camera will be turned on and the buzzer will sound. Power off: Press and release it, the camera will be turned off and the buzzer will sound. 4. Replacement of battery of watch-type remote controller When electrical quantity in the remote controller is low and the battery needs to be replaced, open the battery door with a coin carefully, and avoid its appearance being damaged.
II. Connecting the device to an HDTV Connect the video camera to a HDTV with a HD cable as illustrated below. After power is on, display signals in the video camera will be output to the HDTV automatically, and HD videos and photos can be browsed in the HD TV. Note: Stop video recording or playing before connecting or pulling off the HDMI cable.
III. Illustrated use of accessories: 1. Silicaon suction 2.
5.
Applications (Android and Apple systems supported) I. How to acquire APP installation program? 1. For android system, search for SYMAX360 in Play store and acquire the installation program, and install it as per the prompt, or scan the QR code on the color box for installation. 2. For Apple system, search for SYMAX360 in Apple store and acquire the installation program, and install it as per the prompt, or scan the QR code on the color box for installation. II. Application of APP programs 1.
2. Insert the card into the video camera and turn it on, press Wi-Fi key to activate Wi-Fi, and a prompting word of Wi-Fi signals will be displayed on the screen; 3. Turn on Wi-Fi on the mobile phone or the tablet, search for P1800-xxxxxx, the name of wireless AP signal, input the wifi password : 1234567890, then connect it till the system shows that connection is successful; 4.
Applications on the personal computer: This video camera is for plug and play, in power-on state, connect the device to the computer with the USB cable, it will be switched to movable hard drive mode automatically. The icon of movable drive will appear on the window of “My Computer”. The photos you take will be saved in I:\jpg folder in the movable drive (I is the movable drive of this device), video files you take will be saved in I:\video and car-borne files you take will be saved in I:\CAR folder.
Technical parameters Image sensor 8.0 million pixels (CMOS) Functional mode Video recording and photographing Lens F2.0 Video resolution 1920*1440P (30fps)、 1440*1080P (30fps) Photo resolution 3840*2160、3072*1728、2560*1440 f=1.1mm Video H.264(MOV) Picture JPG File format Storage medium TF card (max. 32GB supported) USB interface High-speed USB 2.
FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure The device has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction.
IC Notice: This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device.
Avis d’Industrie Canada Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes: 1) I'appareil ne doit pas produire de brouillage; et 2) I'utillsateur de I'appareil doit accepterbrouillage radioélectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.