PDV3600 User’s Manual 1
Appearance and buttons 1 4 6 1. LCD display screen 2. Power/Mode 3.WIFI Indicator (red) 4. Power indicator/Charging indicator (Blue) 9 2 5 3 7 77 5.Wifi/Menu 6.Busy (red) 7.Shutter /OK key 8.Camera Lens*2(220°) 8 8 10 13 9. Triangle nut 10. Access flap(USB, TF) 14 11.Loudspeaker 12.Microphone 11 13. Lanyard hole 12 14.
How to use your Wifi camera? 1. First, insert a micro SD or micro SDHC card; see the picture on the right; SDHC above Class 6 is recommended. When the professional mode is on for video recording, Class 10 is recommended for use. Please close the camera when plug-in or pull-out the card. 2. Turn-on & Turn-off: Turn-on: Press the on/off button and hold for about 2 seconds. With a sound of “Be-” from the buzzer, LCD display screen will be on (default mode: video recording).
power saving mode. The LCD display screen will be off automatically. The camera can be activated when any button is pressed. Turn-off: Press the button and hold for about 3 seconds when the camera is not in operation. With a sound of “Be-” from the buzzer, the camera will be off. The camera will be automatically off when it is in power saving mode for 3 minutes (system default). “GOODBYE” will be on the LCD screen when it is off. 3.
the button on/off /MODE or through APP. Video recording: (see the following pictures) press the shutter to start shooting and video recording. The buzzer will send out one sound when it starts; the busy button (red) will be twinkling during the video recording process. LCD timer starts timing. Press the button again when video recording is over. Photograph shooting: Short press the take-photo button to shoot photographs after it is switched to the photo-shooting mode.
5. Menu operation: Press the WIFI button for 2 seconds to activate the menu: 设置模式菜单 Enter the menu, short press the WIFI button to move the cursor for selection; press the shutter button for confirmation; extended press the WIFI button to cancel the setting or exit. Power Save: the power saving mode has 4 settings, i.e. OFF/1min/3min/5min. When the setting-time is up, the camera will enter power saving mode and the screen will be off.
6. Watch Remote Controller: 1. Watch remote controller is shown in the picture: 1.power 2.video button 3.photo button 4.button indicator(red) 5.watchband 6.watch clasp 2. Instructions: The camera can be operated for starting up, video recording, photograph shooting and shutting down when the watch remote controller is used within the distance of 30 meters. Press the related button on the controller for videos, photos or turning off. P.S.
the buzzer. Turn-off: press button, the camera will be off with a sound sent out by the buzzer. 4. Battery replacement: Battery should be replaced when the power is low. Open the battery case carefully with a coin to avoid scrape. APP (for Android and iOS) I. How to get the APP Installer? 1. For Android users, please search for “SYVR360” in the Play store and install it according to its instructions; or scan the 2-dimentional bar code 2. on the graphic carton for installation.
scan the 2-dimentional bar code on the graphic carton for installation. II. APP Application 1. After installing SYVR360 (provided by the supplier or Internet) on the mobile phone or tablet PC, the icon will be shown on the screen; 2. Insert a card and turn the video camera on, press the Wi-Fi button to connect Wi-Fi, whose icon will be shown on the screen; 3.
tablet PC terminal. 2.Wi-Fi indicator will be normally on when the mobile phone or tablet PC terminal is connected to the video camera. When applied to the PC: _______ The video camera has the plug and play function. When connected to a PC by the USB cable, it will automatically switch to the mobile HDD mode. The removable disc icon will appear on “My Computer”. Your photos are stored in the folder I:\jpg (I is removable disc for this device) in the removable disc.
Technical Parameters Image sensor 8 million pixel (CMOS) x2 Function Mode Video recording; photograph shooting Camera lens F2.0 f=1.1mm Video resolution ratio 1920*1080P (30fps) Photograph resolution ratio 3008*1504 video H.264(MOV) photo JPG File format Memory Medium TF card(maximum:32GB) USB port Hi-speed USB 2.
Label Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.