USER MANAUAL Product name：Wifi Camera Model：WDV5300 Rating：5V 500mA Operating Manual 1
Appearance 1. 2. 3. 4. 5. 6. 7. Shutter button LCD display Power/Mode button Lens WIFI switch and status indicator (red) Microphone Work indicator 8. Micro USB port 9. TF card slot 10.
LCD display of the camera The LCD displays the following status and settings: 1. Camera mode 2. Video recording mode (default) 3. WIFI icon (display when enabled) 4. TF card icon (display when loaded) 5.
Note: the above icons may vary according to the status of the camera. Camera mode flow chart: Under HI video recording mode, press the Power button to switch to LO，and under LO video recording mode, press the Power button to switch to HILO.
Use your WIFI DV: 1. Insert a micro SD or micro SDHC card, as shown in the following picture. High speed card at least Class 4 is recommended; if using 0.5s delay function or recording video in professional mode, the card of Class 10 is required. ！ Caution: Turn off the camera before inserting or removing the card. 2. Charging the battery. The camera uses built-in chargeable lithium battery. Connect the camera to the PC via USB cable to charge the battery.
displays “ON” and a beep can be heard from buzzer. Turn off: press and hold the button for 3 seconds, LCD displays “OFF” and a beep can be heard from buzzer. Note: The camera will turn off automatically if it is left unused for 5 minutes. 4.
Stands for 0 hour and 00 minute Recording time Display when a TF card is inserted, TF card icon and otherwise no display Battery level Battery is full The camera is in Mute mode, no Beep will be heard when pressing the Mute icon buttons. It displays only when Mute mode is activated. Wi-Fi icon Display when activated 5. The camera provides different shooting modes.
To record a video, check whether the camera is under Video mode. If the icon the is not displayed on the screen, press button repeatedly until it appears. Start recording: Press and release the button, the icon and [:] displayed in LCD will flash. At same time the red indicator will flash too, meaning the recording is in process. Stop recording: button, the icon Press and release the and [:] displayed in LCD will stop flashing.
Taking a photo Press and release the button, a beep will be heard and the red indicator will flash, meaning a photo is taken. Enable/disable wifi The wifi is disabled by default. Press the wifi button on the side of the camera to enable it.
button again to exit Mute mode. Buzzer is enabled by default When Mute mode is enabled, the Mute icon will display on LCD APP (support Android and iOS) Before using 1 How to install an APP: 1.1 Scan the QR code printed on the packaging to acquire SYMAGIX App; or 1.2 Search for ”SYMAGIX” in Android market (for Android OS) or APP STORE (for iOS) to find the App and install it according to the instruction.
LCD; 3. Enable wifi on Android mobile phone or MID and search for wireless AP signal SY5300_wifi, then connect the camera to it until the system displays “Connected successfully”; When SY5300_ Wifi is connected, find the icon in the App list of the Android mobile phone or MID and click to open it. Now you can preview the image sent by the camera on the mobile phone or MID and start operating the camera.
4 Switch between Video and Photo mode 5 WIFI connection status Note: 1 A TF card must be inserted if you need to take a photo, record a video, or download photo on the terminal; 2 The WIFI indicator will remain on when the terminal is connected to camera. iOS App 1 Install ipa file (provided by dealer or via internet) on iPhone or iPad, when installation completes, the LCD will display icon 2 ; Insert the TF card and turn on the camera, then press the wifi button to enable it.
mobile phone or iPad and start operating the camera.
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
