DV152英文说明书 英文说明书 In the package Video Recorder User Manual CD Warranty Card Quick Guide Warranty Card Quick Guide 1 USB cable TV cable
In the package….…………………………………….…………………………………………..2 FCC statement……………………………………………………………………………………4 Introductory information.……………………………………………………………………….. 5 B as ic i nfo rmat io n……… ……………… ………… ………… ………………… ……….. 5 K n o w yo u r r e c o r d e r … . . . . . . . .… …… … … … … … … … … … …… … … …… … … … … … . .6 Basic Operation Ready to go…………………………..…………………………………….....9 Installing Batteries……………………………………………………..….………………9 U s i n g t h e S D C a r d … … … … … … … … … … … … … … … … … … … … .
FCC statement This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. Pertinent testing documentation is available for verification. Shielded USB cables must be used with this unit to ensure compliance with the Class B FCC limits.
Know your video recorder 1 Lens 2 Self timer LED light 3 LED support light 4 Zoom in button 5 Zoom out button 6 Direction buttons (Up/Down/Left/Right) 7 OK button 8 Display button 9 MENU button 10 LCD screen 11 Mode indicator 12 Mode switch 13. Hand strap anchor post 14.
TOP VIEW BOTTOM VIEW 15. Macro / Normal lens switch 16. Zoom button Socket 19. SD Memory card slot 6 17. Shutter button 18.
RIGHT SIDE VIEW LEFT SIDE VIEW (with LCD SCREEN opened) 20. Built in speaker 21. Battery cover 22. Battery cover LOCK Button 23. TV/USB port 24. Voice recording button 25. Support LED light button 26. Power Indicator 27.
Basic Operation - Ready to go 1. Installing Batteries 1. Press in the Battery cover LOCK button and slide back / open the cover. 2. Insert four (4) fresh AAA alkaline batteries; note terminals polarity and align batteries correctly. 3. Close the Battery cover; the LOCK will click securing the cover. Note: Batteries are not supplied and need to be purchased separately 2. Using the SD Card - Insert / remove the SD Card 1.
3. Select the Focusing range Slide the Macro / Normal lens switch to select required position; TOP VIEW for typical video or picture taking when the subject is 1. Normal: Set to Normal located at 5 feet or more from the recorder. 2. Macro: Set to Macro only for shooting very close-up objects located just 6 ~ 10 inches from recorder.
4. Power ON and OFF your recorder 1. Open the LCD screen 2. Press and then hold the Power button down for two to three seconds to turn the power ON. The Power indicator will light, the recorder becomes active and the LCD will display the scene. 3. Press the Power button again for two to three seconds (when recorder is active) to turn the power OFF. Auto Power OFF: Your recorder has Auto Power OFF feature. If recorder is unused for 1 minute, the power will turn OFF automatically to save batteries.
turned OFF. Replace exhausted batteries 5. Select the MODE Slide the Mode switch up or down to select desired MODE Video Mode: select this mode to record Videos Camera Mode: select this mode to take Still Pictures Playback Mode: select this mode to playback video, voice recordings or review still pictures. 6. Basic operations Video Recording: In video mode press shutter button to start Video Recording. Press again to stop.
Playback: In playback mode press OK button to playback recorded video clips or voice records. Press OK again to stop playback. Press LEFT or RIGHT button to browse still pictures. Menu selection: Press menu button to see and adjust many different setting options. Use Up/Down/ Left/ Right buttons to scroll and select. Press OK to confirm selection and menu button to exit. Advanced Operations 7. Setting Date / Time 1. Press MENU button, then select Setup to enter setting date / time adjustment mode 2.
LED support light - Use this LED support light when taking images in dark or low light scenes. Note that as this light has limited range, please use additional auxiliary light to brighten the scene instead to get proper exposure. Press the LED support light button to activate this lamp. Press again to turn OFF. Self timer LED indicator - This lamp indicates that the recorder is active in Self-timer Mode. Refer to section in manual for Self-timer setting details.
9. Video MODE Preview / scene mode: The following icons / information are displayed on the LCD screen in Video MODE. 1 Video Mode icon 2 Auto White Balance icon Available: Auto/Daylight/Cloudy/Fluorescent/Tungsten Metering / exposure (multi) 3 4 640 Video resolution indicator 1080x720, 640x480 or 320x240. 5 00:00:00 Video recording counter; hours, min, sec.
Recording Video clips Turn the recorder ON and select the Video MODE Point the lens towards the subject, observing the scene appearing on the LCD screen.
Video mode / Menu When the recorder is in Preview / scene Mode press the Menu button to enter available settings as below: Use the Up / Down buttons to browse and select available Menu options then press the Right button to review available settings. Press Up / Down button to select desired setting then press OK button to confirm your selection.
Mode. Note: When ‘HD’ video resolution is selected, ‘Frame Rate’ option is disabled. 10 Camera MODE Preview / scene Mode: The following icons and information are displayed on the LCD screen in Camera MODE.
12 LED Supporting light ON icon 13 4.0 Zoom value indicator. Taking Still pictures Turn the recorder ON and move the Mode Selector to the Camera Mode Aim at the scene or subject visible on the LCD screen Keep recorder steady then press the Shutter Button to take a picture. Note: The LCD will display “Card Locked!” message if the inserted SD memory card is set in LOCK (locked) position and recorder will NOT take a picture. Remove, unlock and re-insert the SD card to take and store pictures.
Use the Up / Down buttons to browse and select available Menu options, then press the Right button to review available options.
Press Up / Down button to select desired setting, then press OK button to confirm. Press the Menu button to exit the Camera Menu mode. Driver Mode The Driver Mode will allow you to adjust / set the Self- timer, or take three consecutive pictures in the Burst Mode. - Self timer Browse and select the Driver Mode then press the Right button to access the available Self Timer options then select 2 or 10 seconds delay time. Press OK to confirm, then press MENU to exit setting.
pictures. 11 Voice Recording MODE: Set Recorder to Video or Camera recording mode. 1 Press the Voice Recording button to enter the Voice recording options 2 Press the Shutter button to start recording 3 Press Up button to pause recording, press again to continue recording 4 Press the Shutter button to stop recording Recording Stop 1. Voice Recording Mode icon 2. Counter showing available recording time remaining 3. SD Memory card icon 4.
5. Battery / power level status 12 Playback MODE Power the recorder ON and slide the MODE selector all way down to enter the Playback mode. Use Right / Left buttons to review / select stored records; Video, Still Pictures or recorded Voice. Press OK button to play selected video or recorded voice file. You can “zoom” the displayed photo images by pressing the zoom IN / OUT buttons or sliding Zoom IN / OUT switch.
Press Zoom Out button to enter the Thumbnail / Playback mode. Note: : This icon indicates recorded voice file : This icon indicates video media file. : This icon indicates photo with “voice added memo” file. You can use the direction key to select desired image file, and press OK key or Zoom IN key to exit this Thumbnail mode and return to full screen display mode.
Select the Video or Voice file then press OK button to start playing selected record. You may press Up button to pause or press OK again to stop playing.
Use Up / Down buttons to select desired function, use Right button to obtain access to available setting. Use Up / Down buttons to select option, then press OK to confirm. Note: The locked files can not be deleted.
Resize function You can “resize” the image only to the smaller size than original Press Shutter button to stop the recording; 26
Note: Options highlighted in gray color are not available for selection. Adding Voice Memo to Images You may add a Voice Memo / comment to selected image. 30 seconds is the maximum Voice Memo recording time. Playing image with the Voice Memo file 1 Use direction buttons and select the image with the Voice Memo 2 Press OK to start playing the selected jpg with voice memo 3 Press Up key to pause / resume playing, press OK to stop Start up image You can set your favorite picture as your own “Welcome” screen.
3. Press the MENU button entering the Internal settings 4. Use the UP/ Down buttons to select Start-up Image option. 5. Press the Right button and select My Image. Then press OK to confirm. 13 Setup / Internal setting mode: 1. Turn the recorder ON then press the MENU and Right button to enter internal settings 2. Use the Up/ Down buttons to select desired setting and press the Right button to access available options; see available setting options below. 3.
Note: 29
Format: Formatting the SD card (when the card is inserted) will erase all data. Make sure to back up & save important files / records before formatting SD card. Connecting Recorder to the Computer Please install the Driver (bundled on supplied CD) first, before connecting recorder to the computer. Note: Installation of the Driver is required ONLY if you wish to use your recorder as a PC cam to see or transfer live images, scenes through the Internet. 1. Driver Installation 1.
Note: If your computer did not start CD Installer as Auto run, please open My Computer, go to CD ROM, and select “autorun.exe” program located in the CD root directory. • Driver installation Click “Install Driver” button, follow provided steps and complete installation. • Restart computer when installation has been completed. Note: The Driver (bundled on CD) is suitable for Windows XP, Vista, 7 Use supplied USB cable and connect video recorder to computer USB port.
Note: The recorder has two USB modes; MSDC (default, when power ON) and PCCAM (when selected from Internal Setting Menu) - The default MSDC (Mass Storage / Removable Disc) is used for playback and downloading video, pictures into the computer. - The PCCAM (PC camera / webcam) can be used for transferring live images, scenes into the computer. 3. Download video, picture files to the computer: - Power ON recorder and connect to the computer using USB cable.
- You can click to play / review selected records and / or store valuable records inside computer’s memory. - Copy or drag files into the folder where you wish to save your records. MediaImpression Installation You may install MediaImpression software into your computer from installation CD. This program will allow you to import / store all, or selected records from your camera (when connected) to your computer. Also MediaImpression will give you easy access to YouTube and other popular websites.
Please restart the computer when prompted to complete the installation, computer will install MediaImpression shortcut / icon on the Desktop. Using MediaImpression The MediaImpression program will also provide “one button” access to the YouTube website: - post your video and share with millions of Internet users! Double click the icon on the desktop or follow “Start → Programs” to open MediaImpression After starting MediaImpression, click “Import” to import the media.
Choose the video camera storage and choose the output location.
location. Click “Go to Start Page” to return the main screen; click the “Video” or “All Media” to get the “YouTube” access.
Choose file and click “Upload to YouTube” Enter your username and password to login to YouTube, execute upload / post selected Video. Note that when software installation is complete, please reboot the computer for the first time operation. 5. PC Camera function - Power ON the recorder and set it at the PC Cam Mode (refer to the Manual if required). - Connect recorder with your PC and open MediaImpression program. - Click and follow onscreen prompts Live images, scene will appear.
Note: If no images or scene is visible; please check whether the Driver for the recorder is installed properly and check whether the selected Video recorder is indicated. Refer to MediaImpression “Help” if further information required. Connecting recorder to TV You may connect recorder to your TV and watch recorded video clips or view photos on the TV screen. Turn on the power of the recorder.
Use Right / Left buttons of the recorder to review / select stored Video and Photos. Press OK button to play selected video on your TV. Safety precautions Your video recorder is a complex electronic digital device and you need to be aware of and follow basic precautions: . Do not try to open the housing of the video recorder or attempt to modify this video recorder in any way. Maintenance and repairs should be carried out only by an authorized service agent.
Format the SD memory card before using with the recorder; save important records first before formatting the card, as the formatting will erase all data. Using the SD memory card: 1. Keep the card away from extreme heat or dust, do not bend or tamper with the card. 2. Do not force the card when inserting into the recorder; if you feel resistance check card alignment and reinsert card carefully. 3.
Key features Digital video recorder – HD video resolution and other resolution options Still picture capability up to 10 Mega pixel image resolution Mass Storage / PC webcam mode 4 X digital zoom TV output 2.
White balance Exposure Self-timer File format External Memory USB interface Power supply Dimensions (L×W×H) Weight Mass storage, Web Cam Auto/manual: Daylight, cloudy, Tungsten and Fluorescent Automatic/manual (-2.0EV~+2.0EV, 0.3EV/step) 2/10 seconds delay Video AVI Photo JPEG Voice WAV SD Card slot - accepts up to 8 GB card (card not supplied) USB 2.0 interface Battery: 4×AAA alkaline 1.5V (not supplied) 4.5 × 1.65 × 2.45 inches 5.